Sony PCGA UVC11A Operating Instructions - Page 20
Disconnecting the camera, Close the software used by the camera., Disconnect the USB cable
UPC - 027242649156
View all Sony PCGA UVC11A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Disconnecting the camera Notes • If you disconnect the camera while the computer is on, follow the steps below. If you do not follow these steps the computer may malfunction. • When your computer is off, you do not need to perform step 1 below. However, if you disconnect the USB cable while your computer is in power-saving mode, and then connect it again, the camera may not be detected. 1 Close the software used by the camera. 2 Disconnect the USB cable, and then remove the camera. Notes • If you pull on the cable itself when disconnecting the USB cable, you may damage the cable. Make sure that you hold onto the connector when disconnecting the cable. • When removing the camera from the mounting adapter, spread the arm plate with your hand, and then remove the camera. 20 GB