Sony PCGA UVC11A Operating Instructions - Page 30
Troubleshooting - driver for windows 7
UPC - 027242649156
View all Sony PCGA UVC11A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Troubleshooting If a problem occurs during operation of the unit, refer to the information provided in this section. If the problem persists, consult your nearest Sony dealer. For contact information, see "Getting Help" on page 28. Also refer to the manuals provided with your computer. Symptom The camera is not recognized by your computer. Images appear grainy in the Network Smart Capture finder Cause/Remedy • The USB cable is not connected properly. c Close the currently open software, and reconnect the cable. • The driver is not installed. c Check whether the driver is installed, and if the device does not display properly, install the driver. For details, see "Setting Up the Camera" (page 7). • The driver was not installed properly. c Uninstall the driver, then restart your computer and install it again. For details, see "Uninstalling the driver" (page 9) and "Installing the driver and the software" (page 7). • The USB root hub is not recognized by your computer. c Reinstall your Windows operating system properly. • USB cannot be used. c Check the system properties for your computer. • The camera is connected to your computer via a USB hub, and the power supplied by the USB hub is insufficient. c Use a USB hub that is capable of supplying 500 mA to the port. • If your computer is equipped with multiple USB connectors, connect the camera to another USB connector and check whether it is recognized properly. • If the camera is connected to the USB connector on the display, the display and your computer are not connected properly. c Check the connection method. When a fast-moving subject is displayed in the finder, horizontal banding may occur in the image, or horizontal lines may occur through the moving part of the image. However, this does not indicate a malfunction. 30 GB