Sony PXW-Z190 Setup Guide for Wireless Network Connection - Page 14

Network Client Mode NCM, 3. FTP Server

Get Sony PXW-Z190 PDF manuals and user guides View all Sony PXW-Z190 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

3.2. Network Client Mode (NCM) Check the XDCAM air or Network RX Station settings information before configuring the camcorder's network client mode settings. The following information is required. • URL or IP address for Connection Control Manager (CCM) • Port number • User name • Password The following operations can also be configured. • Streaming • Controlling the camera from the CCM UI • Applying camera settings once only or continuously using an "ALL File". Network Client Mode can be registered in NCM Settings 1 to 3, and the name to be displayed for each preset can be set. You can also change the name from the preset number (for example, "MyCCM"). 3.3. FTP Server An FTP server must be prepared for file transfers. For secure transfer, the use of FTPS is recommended. The following information is required. • CA certificate • Server URL or IP address • User name • Password 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
14
3.2. Network Client Mode (NCM)
Check the XDCAM air or Network RX Station settings information before configuring the camcorder’s
network client mode settings.
The following information is required.
• URL or IP address for Connection Control Manager (CCM)
• Port number
• User name
• Password
The following operations can also be configured.
• Streaming
• Controlling the camera from the CCM UI
• Applying camera settings once only or continuously using an “ALL File”.
Network Client Mode can be registered in NCM Settings 1 to 3, and the name to be displayed for each
preset can be set.
You can also change the name from the preset number (for example, “MyCCM”).
3.3. FTP Server
An FTP server must be prepared for file transfers.
For secure transfer, the use of FTPS is recommended.
The following information is required.
• CA certificate
• Server URL or IP address
• User name
• Password