Home » Sony Manuals » Video Cameras » Sony PXW-Z190 » Manual Viewer

Sony PXW-Z190 Setup Guide for Wireless Network Connection - Page 25

Wired LAN

Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

When the connection is successful, the following screen appears in the web browser. 5.3.3. Wired LAN 1 Select Network > Wired LAN in the setup menu, and set Setting to On. Note The conditions under which a wired LAN can be used are determined by the combination with other networks and video outputs (SDI/HDMI/VIDEO). For details, refer to the Operating Instructions. 2 Select Network > Wired LAN in the setup menu, and set Camera Remote Control to Enable. Access to the web server of the camcorder is enabled. 25

Section	Page
Table of Contents	2
Chapter 1 Overview	5
Chapter 2 Use Cases	6
2.1. Live Workflow in XDCAM air Example Use Cases	6
2.2. File Workflow in XDCAM air Example Use Cases	9
Chapter 3 Preparation	12
3.1. Network Environment	12
3.2. Network Client Mode (NCM)	14
3.3. FTP Server	14
3.4. USB Headset Connection for Intercom	15
Chapter 4 Setup To-Do List	16
4.1. To-Do List for “Live Streaming”	16
4.2. To-Do List for “Intercom Operation”	16
4.3. To-Do List for “Camera Remote Control”	17
4.4. To-Do List for “File Naming using Planning Metadata”	17
4.5. To-Do List for “Proxy Auto Upload”	17
4.6. To-Do List for “Upload to FTP Server”	18
Chapter 5 Common Setup	19
5.1. Equipment for Wireless Solution	19
5.2. Assembling	19
5.3. Network Settings	20
5.4. Network Client Mode Settings	28
5.5. Network Communication Test	29
5.6. Network Client Mode Communication Test	31
Chapter 6 Setup for “Live Streaming”	33
6.1. Camcorder Settings	33
6.2. Streaming Test	33
Chapter 7 Setup for “Intercom Operation”	34
7.1. Camcorder Settings	34
7.2. Intercom Test	34
Chapter 8 Setup for “Camera Remote Control”	35
8.1. Camcorder Settings	35
8.2. Camera Remote Test	35
Chapter 9 Setup for “File Naming using Planning Metadata”	36
9.1. Camcorder Settings	36
9.2. Planning Metadata Handling Test	36
Chapter 10 Setup for “Proxy Auto Upload”	37
10.1. Camcorder Settings	37
10.2. FTP Server Settings	37
10.3. FTP Server Communication Test	38
Chapter 11 Setup for “Upload to FTP Server”	40
11.1. Camcorder Settings	40
11.2. FTP Server Settings	40
11.3. FTP Server Communication Test	40
Chapter 12 Troubleshooting	41
12.1. Network	41
12.2. Network Client Mode	43
12.3. Use Cases	44

Match case Limit results 1 per page

When the connection is successful, the following screen appears in the web browser.

5.3.3. Wired LAN

Select Network > Wired LAN in the setup menu, and set Setting to On.

The conditions under which a wired LAN can be used are determined by the combination with other

networks and video outputs (SDI/HDMI/VIDEO). For details, refer to the Operating Instructions.

Select Network > Wired LAN in the setup menu, and set Camera Remote Control to Enable.

Access to the web server of the camcorder is enabled.

Note