Sony PXW-Z90 Operating Instructions - Page 10
Identifying Parts and Controls Continued, Attaching the XLR handle unit
View all Sony PXW-Z90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Identifying Parts and Controls (Continued) Attaching the XLR handle unit 1 Remove the Multi Interface Shoe cap. 2 Remove the handle shoe cap. 4 Press and turn the handle mounting screws to tighten them. 3 Align the mark on the XLR handle with the one on the camcorder, and insert the XLR handle unit in the direction of the arrow. z Tips • When attaching the XLR handle unit, make sure to securely tighten both handle mounting screws. • If you use the XLR handle unit without securely tightening the mounting screws, it may damage 10
10
Attaching the XLR handle unit
1
Remove the Multi Interface Shoe cap.
2
Remove the handle shoe cap.
3
Align the mark on the XLR handle with
the one on the camcorder, and insert the
XLR handle unit in the direction of the
arrow.
4
Press and turn the handle mounting
screws to tighten them.
z
Tips
•
When attaching the XLR handle unit, make sure
to securely tighten both handle mounting
screws.
•
If you use the XLR handle unit without securely
tightening the mounting screws, it may damage
Identifying Parts and Controls (Continued)