Sony PXW-Z90 Operating Instructions - Page 42
Selecting the file format and recording format, Recording in MPEG HD - video camera
View all Sony PXW-Z90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Selecting the file format and recording format Setting the file format and recording format Set the file format in (REC/OUT SET) t [REC SET] t [FILE FORMAT] and the recording format (bit rate, picture size, frame rate, scanning method) in (REC/ OUT SET) t [REC SET] t [REC FORMAT] (p. 118). Recording in MPEG HD To use the MPEG HD recording function, "CBKZ-SLMP" (sold separately) is required. After purchasing an option, connect the camcorder to a computer using USB to use the auto detect function, and install by following the instructions on the PC. Setting the output destination when recording in 4K mode You can select the output for the video signal when recording in XAVC QFHD. 1 Press the MENU button. 2 Select (REC/OUT SET) t [VIDEO OUT] t [OUTPUT SELECT] t [QFHD REC OUTPUT]. EXTERNAL OUTPUT Output to external output selected in [OUTPUT SELECT]. b Notes • The [QFHD REC OUTPUT] settings are enabled only when the file format is XAVC QFHD. • The picture being recorded is not displayed on the viewfinder/LCD screen when [QFHD REC OUTPUT] is set to [EXTERNAL OUTPUT]. Also, [NIGHTSHOT LIGHT] is set to [OFF]. • The picture is output to the viewfinder/LCD screen when recording and streaming, even when set to [EXTERNAL OUTPUT]. • If recording in XAVC QFHD is started with [QFHD REC OUTPUT] set to [EXTERNAL OUTPUT], then [LCD BRIGHT] is set to [NORMAL]. • Any one of the following functions can be used while recording in XAVC QFHD. - QFHD REC OUTPUT - FACE DETECTION - Proxy recording (however, not supported when all the conditions below are met) • When (REC/OUT SET) t [REC SET] t [REC FORMAT] is set to 100Mbps • When (REC/OUT SET) t [REC SET] t [SIMUL/RELAY REC] is not set to [OFF] • The power consumption will increase when SDI output is selected, reducing the shooting time using the battery. The camera body may become warm with use - this is normal. 3 Select the output destination. VF/LCD PANEL Output to viewfinder/LCD screen. 42