Sony VPL-VW85 Operating Instructions - Page 50
Screen Menu
UPC - 027242774346
View all Sony VPL-VW85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Screen Menu The Screen menu is used to adjust the input signal. You can adjust the size of the picture, and select wide screen mode, etc. . Note These items may not be available, depending on the type of input signal. For details, see "Input Signals and Adjustable/Setting Items" (1 page 78). Wide Mode (Video signal) You can set the aspect ratio of the picture to be displayed for the current input signal. (1 page 32) This item is enabled only when a video signal (preset memory numbers 1 to 14) (1 pages 75, 75) is input. Wide Zoom: A 4:3 aspect ratio picture is enlarged naturally to fill the screen. The upper and lower portions of the screen are slightly cut off. Normal: A 4:3 aspect ratio picture is displayed in the center of the screen and enlarged to fill the screen vertically. Full: A picture squeezed to 4:3 aspect ratio is displayed in its original aspect ratio. When a 4:3 aspect ratio picture is displayed, the picture is enlarged horizontally to fill the 16:9 screen. Zoom: A picture is enlarged vertically and horizontally in the same ratio to fill the screen. The upper and lower portions are cropped. Anamorphic Zoom: A 2.35:1 aspect ratio picture is converted to a normal 16:9 picture on the screen. This mode is best suited when using a commercially available Anamorphic lens which converts a normal 16:9 aspect ratio picture to a 2.35:1 picture. When set to this setting, only 12 V signal is output from the TRIGGER 2 connector. (1 pages 7, 33) You can switch settings by pressing WIDE MODE on the remote control. 50