Sony VPL-VW85 Operating Instructions - Page 70
Select Yes., Turn on the projector, then
UPC - 027242774346
View all Sony VPL-VW85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
7 Remove the filter holder. 8 Remove the air filter. Ventilation holes (intake) 12 Place the project back on its original position. 13 Turn on the projector, then select the desired setting item on the Setup menu. The menu screen below will be appeared. Claws 9 Attach the new air filter so that it fits into the each claws (10 positions) on the filter holder. Note Attach the air filter aligning it with the shape of the filter holder. Also, do not touch the fan after removing the air filter that is set deep inside the projector. 10 Attach the filter holder. Note The projector will not turn on unless the filter holder is securely closed. 11 Wipe dust off the ventilation holes (intake) with a soft cloth. 14 Select "Yes". Caution Do not put your hands into the lamp replacement slot, and do not allow any liquid or other objects into the slot to avoid electrical shock or fire. Notes • Be sure to use an LMP-H201 Projector Lamp for replacement. If you use lamps other than the LMP-H201, the projector may malfunction. 70