Sony VPL-VW85 Operating Instructions - Page 73
Specifications - sxrd
UPC - 027242774346
View all Sony VPL-VW85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Others Specifications System Projection system SXRD panel, 1 lens, projection system LCD panel 0.61-inch (15.4 mm) SXRD panel 6,220,800 pixels (2,073,600 pixels × 3) Lens 1.6 times zoom lens (motorized) f=18.5 mm to 29.6 mm F2.50 to F3.40 Lamp 200 W Ultra High Pressure Lamp Projection picture size 40 inches to 300 inches (1,016 mm to 7,620 mm) (measured diagonally) Color system NTSC3.58/PAL/SECAM/ NTSC4.43/PAL-M/PAL-N/PAL60 system, switched automatically/ manually (PAL60 system not switched manually) Acceptable video signals 15 kHz RGB/component 50/60 Hz, Progressive component 50/60 Hz, 480/60i, 576/50i, 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24PsF (48i), 1080/60p (HDMI input only), 1080/50p (HDMI input only), 1080/24p (HDMI input only), Composite video, Y/C video Acceptable computer signals fH: 19 kHz to 72 kHz fV: 48 Hz to 92 Hz Maximum resolution 1,920 × 1,080 (HDMI input only) For details, see "Preset Signals". (1 page 75) Input Video input VIDEO: phono type Composite video: 1 Vp-p±2 dB sync negative (75 ohms terminated) S VIDEO: Y/C mini DIN 4-pin type Y (luminance): 1 Vp-p±2 dB sync negative (75 ohms terminated) C (chrominance): burst 0.286 Vp-p ±2 dB (NTSC) (75 ohms terminated), or burst 0.3 Vp-p±2 dB (PAL) (75 ohms terminated) Y PB/CB PR/CR Component: phono type Y with Sync: 1 Vp-p±2 dB sync negative (75 ohms terminated) PB/CB: 0.7 Vp-p±2 dB (75 ohms terminated) PR/CR: 0.7 Vp-p±2 dB (75 ohms terminated) HDMI Digital RGB/Y CB (PB) CR (PR) INPUT A HD D-sub 15-pins Analog RGB/component: R/CR (PR): 0.7 Vp-p±2 dB (75 ohms terminated) G: 0.7 Vp-p±2 dB (75 ohms terminated) G with sync/Y: 1 Vp-p±2 dB sync negative (75 ohms terminated) B/CB (PB): 0.7 Vp-p±2 dB (75 ohms terminated) SYNC/HD: Composite sync input: TTL level, positive/ negative Horizontal sync input: TTL level, positive/negative VD: Vertical sync input: TTL level, positive/negative TRIGGER 1 Minijack Power on: DC 12 V, output impedance: 4.7 kilohms Power off: 0 V TRIGGER 2 Minijack Anamorphic Zoom: DC 12 V, output impedance: 4.7 kilohms The other wide screen modes or Power off: 0 V REMOTE RS-232C: D-sub 9-pins (female) General Dimensions 470 mm × 179.2 mm × 482.4 mm (18 5/8 × 7 1/8 × 19 inches) (w/h/d) Mass Approx. 12 kg (26 lb 8 oz) Power requirements AC 100 V to 240 V, 3.2 A to 1.4 A, 50/60 Hz Power consumption Max. 320 W Standby mode: 8 W Standby mode (low): 0.5 W Operating temperature 5°C to 35°C (41°F to 95°F) 73