Stihl MS 441 C-M MAGNUM174 Product Instruction Manual - Page 34
twist the filler cap clockwise
View all Stihl MS 441 C-M MAGNUM174 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
001BA238 KN English Closing 1 001BA235 KN 001BA234 KN Handle is in an upright position: N Position filler cap - markings on filler cap and housing must align. N Push the filler cap down as far as it will go. N Flip the handle down. Left: Right: Base of filler cap is rotated - interior marking (1) is aligned with the exterior marking. Base of filler cap is in the correct position - interior marking is below the clip. It does not align with the exterior marking. 001BA241 KN N Push the filler cap down and twist it clockwise until it engages. 001BA233 KN Filler cap is now closed. If the filler cap will not engage into the tank housing The base of the filler cap is rotated in relation to the upper part. N Look at the black alignment marks on the top of the filler cap. 001BA231 KN Then the markings on filler cap and housing will align. N With the filler cap in the filling neck, twist it counterclockwise until it drops into its seat. N Continue to twist the filler cap counterclockwise (approx. 1/4 turn) - this will twist the base of the cap into the correct position. N While pushing down on the cap, twist the filler cap clockwise and close it - see section "Closing." 001BA239 KN 32 MS 441 C-M