Stihl MS 441 C-M MAGNUM174 Product Instruction Manual - Page 40
Holding the Saw
View all Stihl MS 441 C-M MAGNUM174 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
219BA038 KN 219BA039 KN English Cranking Starting the Saw WARNING Bystanders must be well clear of the general work area of the saw. STOP 0 1 N Pull the starter grip slowly with your right hand until you feel it engage - and then give it a brisk strong pull and push down the front handle at the same time. Do not pull out the starter rope to full length - it might otherwise break. Do not let the starter grip snap back. Guide it slowly back into the housing so that the starter rope can rewind properly. Machines without additional manual fuel pump: If the engine is new or after a long out-of-service period or if the tank has been run dry (engine stops), it may be necessary to pull the starter rope several times to prime the fuel system. N Press in the button to open the decompression valve. The decompression valve closes as soon as the engine fires. For this reason you must press in the button before each starting attempt. 2 4 3 N Push the hand guard (1) forward - the chain is locked. N If the engine is cold: Press down the trigger lockout (2) and pull the throttle trigger (3) at the same time. Hold both levers in that position and set the Master Control lever (4) to start symbol } N Holding the Saw N Pull the starter grip quickly and firmly as often as necessary until the engine starts. N If the engine does not start: Move the Master Control lever to start position } and repeat starting procedure. 38 MS 441 C-M