Stihl MS 441 C-M MAGNUM174 Product Instruction Manual - Page 56

English Definitions 1 Carburetor Box Cover with Clips Lock for carburetor box cover. 2 Handle Heating Switch (Depending on Model) For switching the electric handle heating on and off. 3 Spark Plug Boot Connects the spark plug with the ignition lead. 4 Shutter (Summer and Winter Operation) With summer and winter positions. Winter position provides warm intake air for cold weather operation. 5 Decompression Valve - (Automatically resetting) Releases compression pressure to make starting easier - when activated. 6 Chain Brake A device to stop the rotation of the chain. Is activated in a kickback situation by the operator's hand or by inertia. 7 Chain Sprocket The toothed wheel that drives the saw chain. 8 Chain Sprocket Cover Covers the clutch and chain sprocket. 9 Chain Catcher Helps to reduce the risk of operator contact by a chain when it breaks or comes off the bar. 10 Chain Tensioner Permits precise adjustment of chain tension. 11 Bumper Spike Toothed stop for holding saw steady against wood. 12 Guide Bar Supports and guides the saw chain. 13 Oilomatic Saw Chain A loop consisting of cutters, tie straps and drive links. 14 Oil Filler Cap For closing the oil tank. 15 Muffler (with Spark Arresting Screen, not Fitted on all Markets) Muffler reduces engine exhaust noise and diverts exhaust gases away from operator. Spark arresting screen is designed to reduce the risk of fire. 16 Front Hand Guard Provides protection against projecting branches and helps prevent left hand from touching the chain if it slips off the handlebar. It also serves as the lever for chain brake activation. 17 Front Handle (Handlebar) Handlebar for the left hand at the front of the saw. 18 Starter Grip The grip of the pull starter, for starting the engine. 19 Fuel Filler Cap For closing the fuel tank. 20 Master Control Lever Lever for choke control, starting throttle, run and stop switch position. 21 Throttle Trigger Controls the speed of the engine. 22 Throttle Trigger Lockout Must be depressed before the throttle trigger can be activated. 23 Rear Handle The support handle for the right hand, located at the rear of the saw. 24 Rear Hand Guard Gives added protection to operator's right hand. Guide Bar Nose The exposed end of the guide bar. (not illustrated, see chapter "Tensioning the Saw Chain") Clutch Couples engine to chain sprocket when engine is accelerated beyond idle speed. (not illustrated) Anti-Vibration System The anti-vibration system includes a number of anti-vibration elements designed to reduce the transmission of vibrations created by the engine and cutting attachment to the operator's hands. (not illustrated) 54 MS 441 C-M