Stihl MS 441 C-M MAGNUM174 Product Instruction Manual - Page 39
handle - your thumb should
View all Stihl MS 441 C-M MAGNUM174 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Master Control lever to start } and let go of the throttle trigger and trigger lockout. The Master Control lever moves from the start position (}) to the run position (F) when you press down the throttle trigger lockout and squeeze the throttle trigger at the same time. Holding the Saw On the ground There are two ways of holding the saw when starting. Between knees or thighs English 219BA036 KN 219BA037 KN N Place your saw on the ground. Make sure you have a firm footing - check that the chain is not touching any object or the ground. N Hold the saw firmly on the ground with your left hand on the front handle - your thumb should be under the handle. N Put your right foot into the rear handle and press down. N Hold the rear handle tightly between your legs, just above the knees. N Hold the front handle firmly with your left hand - your thumb should be under the handle. MS 441 C-M 37