Stihl MS 441 C-M MAGNUM174 Product Instruction Manual - Page 47
Storing the Machine
View all Stihl MS 441 C-M MAGNUM174 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Installing the spark plug English Storing the Machine 0000-GXX-1830-A0 219BA033 KN 1 3 2 N Screw home the spark plug, fit the boot and press it down firmly. N Fit the carburetor box cover. WARNING To reduce the risk of fire and burn injury, use only spark plugs authorized by STIHL. Always press the spark plug boot (1) snugly onto the spark plug terminal (2). Do not use a spark plug with a detachable SAE adapter terminal (3). Arcing may occur that could ignite combustible fumes and cause a fire. This can result in serious injuries or damage to property. N Only use resistor type spark plugs with solid, non-threaded terminals For periods of 3 months or longer N Drain and clean the fuel tank in a well ventilated area. N Dispose of fuel properly in accordance with local environmental requirements. N Run the engine until the carburetor is dry - this helps prevent the carburetor diaphragms sticking together. N Remove the saw chain and guide bar, clean them and spray with corrosion inhibiting oil. N Thoroughly clean the machine - pay special attention to the cylinder fins and air filter. N If you use a biological chain and bar lubricant, e.g. STIHL BioPlus, completely fill the chain oil tank. N Store the machine in a dry, high or locked location, out of the reach of children and other unauthorized persons. MS 441 C-M 45