Stihl SR 450 Product Instruction Manual - Page 15

1 4 5 2 N Slide the wide hose clamp (1) onto the pleated hose (4). N Secure the wide hose clamp (1) with the screw (5) - the blower tube (2) must still rotate. Fitting the pleated hose on the elbow - SR 430 only 6 7 4 N Slide the narrow hose clamp (6) (bezel facing left) onto the elbow and line it up. N Push the pleated hose (4) over the elbow (7). 0002BA006 KN 0002BA005 KN 6 4 8 8 6 N Slide the narrow hose clamp (6) onto the pleated hose (4). N Secure the hose clamp (6) with the screw (8) from the side facing the operator. Fitting the antistatic system - SR 450 only 3 1 2 0002BA007 KN English Fitting the pleated hose on the elbow - SR 450 only 0002BA008 KN 0002BA009 KN 94 N Push the antistatic wire (9) into the pleated hose (4). 6 7 4 9 N Slide the narrow hose clamp (6) (bezel facing left) onto the elbow and line it up. N Push the antistatic wire (9) between the ends of the narrow hose clamp (6). N Push the pleated hose (4) over the elbow (7). 0002BA054 KN N Attach the antistatic wire (1) and chain (2) to the blower housing with screw (3). SR 430, SR 450 13