Stihl SR 450 Product Instruction Manual - Page 28
Filling the Container
View all Stihl SR 450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
English back and forth) as for the real run described below. Determine the distance walked in one minute. Also use the trial run to check the selected working width. The best working width for low-growing crops is 4-5 m. Mark the working width with stakes. Dividing the distance walked in meters by the time in minutes gives you the walking speed in meters per minute (m/min). Example: The distance covered in one minute is 10 meters. Walking speed: 10 m = 10 m/min 1 min Determining discharge rate The setting of the metering unit is calculated as follows: Va(l) x vb(m/min) x b(m) A (m2) = Vc(l/min) Va = Quantity of solution vb = Walking speed Va = Discharge rate b = Working width A = Area Example: The values determined above and a working width of 4 meters require the following setting on the metering unit: 144 l x 10 (m/min) x 4 m 3,600 m2 = 1.6 l/min Hectares (ha) have to be converted into m2 (ha x 10,000 = m2). To adjust the required discharge rate see "Metering Unit". Filling the Container 1 372BA021 KN N The gasket (1) in the cap must be in good condition, lubricated with grease and clean. N Stand the machine on a level surface. N Do not exceed maximum level of 3.7 gal (14 liters) (arrow). 0002BA039 KN 26 SR 430, SR 450