Stihl SR 450 Product Instruction Manual - Page 16
Adjusting the Throttle, Cable
View all Stihl SR 450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
English 6 4 8 8 6 N Slide the narrow hose clamp (6) onto the pleated hose (4). N Secure the hose clamp (6) with the screw (8) from the side facing the operator - make sure the antistatic wire is positioned in the notch. Adjusting and securing the control handle 0002BA010 KN a 1 2 N Slide the control handle (1) along the tube to the most comfortable position - distance between nozzle outlet (2) and the control handle (1) must be at least 19.7 in. (a) (500 mm). 1 3 N Secure the control handle (1) with the screw (3). 0002BA058 KN 0002BA011 KN Adjusting the Throttle Cable It may be necessary to correct the adjustment of the throttle cable after assembling the machine or after a prolonged period of operation. Adjust the throttle cable only when the unit is completely and properly assembled. N Set throttle trigger to the full throttle position - as far as stop. N Carefully rotate the screw in the throttle trigger in the direction of the arrow until you feel initial resistance. Then rotate it another full turn. N Put the machine on your back and adjust the harness - see "Harness". 4 0002BA013 KN 0002BA012 KN N Use the retainer (4) to secure the hose and throttle cable, and metering unit's operating cable on the SR 450, to the 6th pleat (arrow) on the pleated hose. 14 SR 430, SR 450