Stihl SR 450 Product Instruction Manual - Page 35
Replacing the Starter Rope, and Rewind Spring
View all Stihl SR 450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Replacing the Starter Rope and Rewind Spring Replacing the Starter Rope English 0002BA050 KN 213BA018 KN 1 1 2 1 N Take out the screws (1). N Remove the starter cover (2). N Use a screwdriver or suitable pliers to remove the spring clip (3) from the starter post. The rewind spring may pop out and uncoil during this operation - take care to avoid the risk of injury. N Carefully remove the rope rotor with washer (4) and pawls (5). N Use a screwdriver to pry the rope out of the starter grip. N Remove the remaining rope from the rotor and starter grip. N Thread the new rope through the starter grip and tie one of the special knots shown. N Pull the knot back into the grip. N Thread the end of the rope through the top of the guide bushing (6) and rope rotor (7) and secure it with a simple overhand knot. N Coat the rope rotor bearing bore with non-resinous oil. N Slip the rotor over the starter post (8) - turn it back and forth to engage the anchor loop of the rewind spring. SR 430, SR 450 33