Stihl SR 450 Product Instruction Manual - Page 23
SR 430, SR 450
View all Stihl SR 450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Fitting the strainer 2) English Adjusting the discharge rate A B C The strainer supplied must always be fitted when the ULV metering knob is used. SR 430 2 4 0002BA064KN 0002BA027 KN - Standard metering knob (A) with positions 1 to 5 - Fine metering knob (B) with positions 1.0 to 2.3 - ULV metering knob 1) (C) with positions 0.5 to 0.8 Changing the metering knob N Pull the existing metering knob up and out of its seat. N Push the new metering knob into its seat as far as stop. 0002BA065 KN SR 450 N Push the strainer into its seat until it snaps into position. Removing 0002BA066 KN 3 N Turn the metering knob (2) on the nozzle (3) to obtain the required discharge rate - see tables. The numbers on the metering knob must be lined up with the lug (4) under the knob. Position "E" is used for emptying the container. Do not use this position for spraying - see "After Finishing Work". Machines with pressure pump (special accessory) On machines with a pressure pump, use only the supplied "fine" metering knob with settings 1.0 to 2.3 or the ULV metering knob with settings 0.5 to 0.8. Discharge rate without pressure pump Spray tube 0° to -30° to the horizontal 0002BA067 KN 1) Included in the scope of supply or available as a special accessory depending on market N Pry the strainer out of its seat - as shown. 2) Included with ULV metering knob SR 430, SR 450 21