TASCAM DM-24 Installation and Use Automation Manual - Page 8

2 - Quick Start Write some Aux send moves 8 Write Auxiliary Send moves using the touch-sensitive faders: To place the Auxiliary Sends 1 & 2 under fader control, press AUX 1-2 and choose Auxiliary Send 1 by pressing the first soft key under the display. With time code running, press the WRITE key. Writing POD moves 9 Write a POD Control move (EQ or Aux Send): With time code running, press the WRITE key. Select the appropriate screen on the display, and turn the desired POD control to write the mix move. Trimming existing mix moves 10 This allows you to trim an existing mix move (that is, to adjust the overall level of the move). For example, the move you wrote in step #6 is good but the move itself need to be louder. With time code running, press the TRIM key. Finishing up 11 Remember to store your mix (as described in in "AUTO FILES" on page 14 and "Mix File Management" on page 36). Also, remember to store any effect settings that were used in your mix into the libraries. Touch a fader and move it up or down to write a mix move for Auxiliary Send 1 for that channel. Release the fader when your mix move is complete. When you release the fader, it automatically returns to its previous setting. After the POD movement has stopped for one second, the control will automatically return to its setting before being moved. NOTE You may want to disable AUTO REVERT or adjust the CONTROL SENSE TIMEOUT using the AUTO MAIN screen, when automating POD controls. See "Auto Revert Choices:" on page 28 At the desired time, touch the fader to be trimmed with your finger and raise it. You will hear the previous moves with the addition of the amount of trim you're adding. Release the fader when you are finished trimming. The fader returns to reading previous, untrimmed mix moves. Happy mixing! 8 TASCAM DM-24 Automation