TASCAM DM-24 Installation and Use v 2.0 Manual Addendum - Page 20

HUI emulation

Get TASCAM DM-24 PDF manuals and user guides View all TASCAM DM-24 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

DM-24 version 2.0-Release notes-GPI functionality On the MIDI/MC SETUP page, the filtering of MIDI Control Change messages can now be carried out independently for external control (EXT.CTRL) and Mix parameters (Mix Parm). These can be set independently for In and Out for both types of Control Change message. HUI emulation The DM-24 is now able to emulate the Mackie HUI™ device, and can therefore act as a controller (pans, sends, faders and mutes) for various DAW applications (e.g. ProTools, Digital Performer and Nuendo) via MIDI. NOTE This is not a 100% emulation of every one of the Mackie HUI functions, and there is no guarantee, despite our best efforts, that an external unit that is controlled by a Mackie HUI will behave identically in every circumstance as the same unit controlled by the DM-24's HUI emulation. The HUI "device" is a closed loop MIDI device, and is selected from the machine control list (if the closed loop is not detected, the display shows a cross for the device type, rather than the double-headed arrow usually used to denote a closed loop device. There is one parameter which may be set here-the MIDI channel (from 1 through 16). 20 TASCAM DM-24 2.0 release notes The setup enables MIDI to be received by the HUI emulation as well as setting the ID of the device. HUI transport emulation, etc. can be enabled or disabled in this screen and the external control screen (described below) enables other functions. As with other machine control devices, the SCREEN button jumps to the special screen from which the HUI is controlled:

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
20
TASCAM DM-24 2.0 release notes
DM-24 version 2.0—Release notes—GPI functionality
On the
MIDI/MC SETUP
page, the filtering of MIDI
Control Change messages can now be carried out
independently for external control (
EXT.CTRL
) and
Mix parameters (
Mix Parm
). These can be set inde-
pendently for In and Out for both types of Control
Change message.
HUI emulation
The DM-24 is now able to emulate the Mackie
HUI™ device, and can therefore act as a controller
(pans, sends, faders and mutes) for various DAW
applications (e.g. ProTools, Digital Performer and
Nuendo) via MIDI.
NOTE
This is not a 100% emulation of every one of the
Mackie HUI functions, and there is no guarantee,
despite our best efforts, that an external unit that is
controlled by a Mackie HUI will behave identically in
every circumstance as the same unit controlled by the
DM-24’s HUI emulation.
The HUI “device” is a closed loop MIDI device, and
is selected from the machine control list (if the closed
loop is not detected, the display shows a cross for the
device type, rather than the double-headed arrow
usually used to denote a closed loop device. There is
one parameter which may be set here—the MIDI
channel (from
1
through
16
).
The setup enables MIDI to be received by the HUI
emulation as well as setting the ID of the device.
HUI transport emulation, etc. can be enabled or dis-
abled in this screen and the external control screen
(described below) enables other functions.
As with other machine control devices, the
SCREEN
button jumps to the special screen from which the
HUI is controlled: