TASCAM DM-24 Installation and Use v 2.0 Manual Addendum - Page 24

DM-24 version 2.0-Release notes-Miscellaneous changes Miscellaneous changes High-speed digital format restored On the DIGITAL FORMAT screen, in high sampling mode ("Constraints on other devices" on page 142), the HI-SPEED mode is supported once more together with NORMAL and DUAL-LINE as options. Flattening an EQ band It is possible to flatten (set the gain to 0) of an EQ band of the selected channel by pressing and holding the 2ND F. key together with the key corresponding to the EQ band to be flattened. External switch (footswitch) functionality The external switch (typically a non-latching footswitch) can be assigned to a number of different functions. With the SHIFT indicator lit, press the UTILITY key, and then select the EXT. SW screen. The following screen appears: Select the switch function from the following list: • Talkback to audio and slate (TO STUDIO AND SLATE) Note that in the 1.60 software release, this mode was not supported. • Talkback to studio only (TO STUDIO) • Talkback to slate only (TO SLATE) • Punch in and punch out (Punch In/Out) • Direct location (Direct Locate)-the number of the direct locate point should be set here as well in the field following this option • Start or stop playback (Play/Stop) • Parallels the 2ND F. key (2ND F) • Parallels the automation KEEP key (Automation KEEP) • Increments the number of the library entry which will be recalled next using direct recall (Increment Direct Library Recall) • Decrements the number of the library entry which will be recalled next using direct recall (Decrement Direct Library Recall) • Allows the timing of the integral delay effect to be set by using the footswitch as a tap tempo input device (Tap Tempo for Delay Effect) • Mutes or unmutes a mute group (Mute On/Off for Mute Group)-set the mute group in the field following the option • Turns the equalization on or off on the currentlyselected channel (EQ On/Off for Current CH) 24 TASCAM DM-24 2.0 release notes