TP-Link AC1600 Archer VR600 V1 User Guide - Page 21
Addressing Type, IPv6 Gateway, Advanced, Network, LAN Settings, Prefix Delegated WAN Connection
View all TP-Link AC1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Chapter 4 Set Up Internet Connections Select the checkbox to enable IPv6 feature. Addressing Type: Consult your ISP for the addressing type, DHCPv6 or SLAAC. SLAAC is the most commonly used addressing type. IPv6 Gateway: Keep the default setting as Current Connection. Note: If your ISP has provided the IPv6 address, click Advanced to reveal more settings. Check to use IPv6 specified by ISP and enter the parameters provided by your ISP. 4 ) Click OK to make the settings effective. 2. Configure the IPv6 LAN settings. Go to Advanced > Network > LAN Settings page. Select IPv6 to configure IPv6 LAN parameters. 1 ) Select the Prefix Delegated WAN Connection, the IPv6 connection you just set up, from the drop-down list. 2 ) Leave the rest of the settings as default. 3 ) Click Save to make the settings effective. 3. Done. IPv6 service is available for your network. 17