TP-Link T1600G-52PS TL-SG2452P T1600G-28PSTL-SG2424P V1 User Guide - Page 154
Subnet Mask, Admin Status, Interface Name, Select, IP Address, Status, Operation
View all TP-Link T1600G-52PS TL-SG2452P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Subnet Mask: Admin Status: Interface Name: Specify the subnet mask of the interface's IP address. Specify interface administrator status. Choose Disable to disable the interface's Layer 3 capabilities. Specify the name of the network interface. Interface List Select : ID: Mode: IP Address: Subnet Mask: Interface Name: Status: Operation: Select the interfaces to modify or delete. Displays the ID of the interface. Display IP address allocation mode. None: without ip. Static: setup manually. DHCP: allocated through DHCP. BOOTP: allocated through BOOTP. Displays the IP address of the interface. Displays the subnet mask of the interface. Displays the name of the interface. Displays interface current working status. Working status is up when admin status is enabled, line protocol is up and IP Address is set. You can configure the interface by clicking the Edit, or check Detail information by clicking Detail. Click Edit to display the following figure: 144