TP-Link T1700G-28TQ T1700G-28TQ V1 User Guide - Page 154
Profile Binding
View all TP-Link T1700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Operation: Click the Edit button to configure the mode or IP-range of the Profile. After you have created a profile ID, click Edit to display the following figure. The following entries are displayed on this screen: Profile Mode Profile ID: Displays the Profile ID you have created. Mode: Displays the attribute of the profile. Permit: Only permit the IP address within the IP range and deny others. Deny: Only deny the IP address within the IP range and permit others. Add IP-range Start IP: Enter start IP address of the IP-range. End IP: Enter end IP address of the IP-range. IP-range Table Select: Select the desired entry for configuration. Index: Displays index of the IP-range which is not configurable. Start IP: Displays the start IP address of the IP-range. End IP: Displays the end IP address of the IP-range. 9.2.7 Profile Binding When the switch receives MLD report message, it examines the profile ID bound to the access port to determine if the port can join the multicast group. If the multicast IP is not filtered, the switch will add the port to the forward port list of the multicast group. Otherwise, the switch will drop the MLD report message. In that way, you can control the multicast groups that users can access. 144