TP-Link T1700G-28TQ T1700G-28TQ V1 User Guide - Page 178
Storm Control
View all TP-Link T1700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Egress Rate(1-1000000Kbps): LAG: Configure the bandwidth for sending packets on the port. You can select a rate from the dropdown list or manually set Egress rate, the system will automatically select integral multiple of 64Kbps that closest to the rate you entered as the real Egress rate. Displays the LAG number which the port belongs to. Note: 1. If you enable ingress rate limit feature for the storm control-enabled port, storm control feature will be disabled for this port. 2. When manually set Ingress/Egress rate, the system will automatically select integral multiple of 64Kbps that closest to the rate you entered as the real Ingress/Egress rate. For example, if you enter 1000Kbps for egress rate, the system will automatically select 1024Kbps as the real Egress rate. 3. When egress rate limit feature is enabled for one or more ports, you are suggested to disable the flow control on each port to ensure the switch works normally. 11.2.2 Storm Control Storm Control function allows the switch to filter broadcast, multicast and UL frame in the network. If the transmission rate of the three kind packets exceeds the set bandwidth, the packets will be automatically discarded to avoid network broadcast storm. Choose the menu QoS→Bandwidth Control→Storm Control to load the following page. Figure 11-11 Storm Control The following entries are displayed on this screen: Storm Control Config UNIT/LAGS: Click unit number to configure the physical ports of this unit member. Click LAGS to configure the link aggregation groups. Select: Select the desired port for Storm Control configuration. It is multi-optional. 168