TP-Link T2600G-52TS TL-SG3452 T2600G-52TS V1 User Guide - Page 195
Policy Config
View all TP-Link T2600G-52TS TL-SG3452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
TCP Flag: S-Port: D-Port: DSCP: IP ToS: IP Pre: Time-Range: Configure TCP flag when TCP is selected from the pull-down list of IP Protocol. Configure TCP/IP source port contained in the rule when TCP/UDP is selected from the pull-down list of IP Protocol. Configure TCP/IP destination port contained in the rule when TCP/UDP is selected from the pull-down list of IP Protocol. Enter the DSCP information contained in the rule. Enter the IP ToS contained in the rule. Enter the IP Precedence contained in the rule. Select the time-range for the rule to take effect. 11.3 Policy Config A Policy is used to control the data packets those match the corresponding ACL rules by configuring ACLs and actions together for effect. The Policy Config can be implemented on Policy Summary, Police Create and Action Create pages. 11.3.1 Policy Summary On this page, you can view the ACL and the corresponding operations in the policy. Choose the menu ACL→Policy Config→Policy Summary to load the following page. Figure 11-9 Policy Summary The following entries are displayed on this screen: Search Option Select Policy: Select name of the desired policy for view. If you want to delete the desired policy, please click the Delete button. Action Table Select: Select the desired entry to delete the corresponding policy. Index: Displays the index of the policy. ACL ID: Displays the ID of the ACL contained in the policy. S-Mirror: Displays the source mirror port of the policy. S-Condition: Displays the source condition added to the policy. 185