TP-Link T2600G-52TS TL-SG3452 T2600G-52TS V1 User Guide - Page 90
Protocol VLAN, Protocol Template, Create Protocol Template, Protocol Template Table, Operation,
View all TP-Link T2600G-52TS TL-SG3452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Choose the menu VLAN→Protocol VLAN→Protocol Template to load the following page. Figure 6-11 Create and View Protocol Template The following entries are displayed on this screen: Create Protocol Template Protocol Name: Give a name for the Protocol Template. Frame Type: Select a Frame Type for the Protocol Template. Ether Type: Enter the Ethernet protocol type field in the protocol template. DSAP: Enter the DSAP field when selected LLC. SSAP: Enter the SSAP field when selected LLC. Protocol Template Table Select: Select the desired entry. It is multi-optional. ID Displays the Protocol Template ID. Protocol Name: Displays the Protocol Name. Protocol Type: Displays the Protocol type. Note: The Protocol Template bound to VLAN cannot be deleted. Configuration Procedure: Step Operation 1 Set the link type for port. Description Required. On the VLAN→802.1Q VLAN→Port Config page, set the link type for the port basing on its connected device. 80