TP-Link TL-SG3210 TL-SG3210 V1 User Guide - Page 109
Multicast IP Table, 2.2 Static Multicast IP
View all TP-Link TL-SG3210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
8.2.1 Multicast IP Table On this page you can view the multicast IP table on the switch. Choose the menu Multicast→Multicast IP→Multicast IP Table to load the following page. Figure 8-8 Multicast IP Table The following entries are displayed on this screen: ¾ Search Option Multicast IP: Enter the multicast IP address the desired entry must carry. VLAN ID: Enter the VLAN ID the desired entry must carry. Port: Select the port number the desired entry must carry. Type: Select the type the desired entry must carry. z All: Displays all multicast IP entries. z Static: Displays all static multicast IP entries. z Dynamic: Displays all dynamic multicast IP entries. ¾ Multicast IP Table Multicast IP Displays multicast IP address. VLAN ID: Displays the VLAN ID of the multicast group. Forward Port Displays the forward port of the multicast group. Type: Displays the type of the multicast IP. Note: If the configuration on VLAN Config page and multicast VLAN page is changed, the switch will clear up the dynamic multicast addresses in multicast address table and learn new addresses. 8.2.2 Static Multicast IP Static Multicast IP table, isolated from dynamic multicast group and multicast filter, is not learned by IGMP Snooping. It can enhance the quality and security for information transmission in some fixed multicast groups. 102