TP-Link TL-SG3210 TL-SG3210 V1 User Guide - Page 37
Port Mirror
View all TP-Link TL-SG3210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Speed and Duplex: Flow Control: LAG: selected, the port can forward the packets normally. Select the Speed and Duplex mode for the port. The device connected to the switch should be in the same Speed and Duplex mode with the switch. When "Auto" is selected, the Speed and Duplex mode will be determined by auto-negotiation. For the SFP port, this Switch does not support auto-negotiation. Allows you to Enable/Disable the Flow Control feature. When Flow Control is enabled, the switch can synchronize the speed with its peer to avoid the packet loss caused by congestion. Displays the LAG number which the port belongs to. Note: 1. The switch can not be managed through the disabled port. Please enable the port which is used to manage the switch. 2. The parameters of the port members in a LAG should be set as the same. 5.1.2 Port Mirror Port Mirror, the packets obtaining technology, functions to forward copies of packets from one/multiple ports (mirrored port) to a specific port (mirroring port). Usually, the mirroring port is connected to a data diagnose device, which is used to analyze the mirrored packets for monitoring and troubleshooting the network. Choose the menu Switching→Port→Port Mirror to load the following page. Figure 5-2 Mirroring Port The following entries are displayed on this screen. ¾ Mirror Group List Group: Mirroring: Mode: Mirrored Port: Operation: Displays the mirror group number. Displays the mirroring port number. Displays the mirror mode, the value can be "Ingress", "Egress", "Both" or "None". Displays the mirrored ports. Click Edit to configure the mirror group. 30