TP-Link TL-WPA9610 KIT TL-WPA9610 KITEU V1 User Guide - Page 33

Backup and Restore Configuration Settings, To backup configuration settings

Get TP-Link TL-WPA9610 KIT PDF manuals and user guides View all TP-Link TL-WPA9610 KIT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Chapter 3 Configuring via Web Management Interface 2. Go to System Tools > Firmware Upgrade page and confirm the Hardware Version. 3. Go to www.tp-link.com. Download the latest firmware file for the extender. Note: The upgraded firmware version must correspond to the hardware. 4. Click Browse to locate the downloaded new firmware file, and click Upgrade. 5. Wait a few minutes for the upgrading and rebooting. Note: 1. Before upgrading the firmware, it's better to back up your current settings. 2. During the upgrading process, do not turn off or reset the extender. 3. 11. 4. Backup and Restore Configuration Settings The configuration settings are stored as a configuration file in the extender. You can back up the configuration file to your computer for future use and restore the extender to a previous settings from the backup file when needed. Moreover, if needed, you can erase the current settings and reset the extender to the default factory settings. To backup configuration settings: 1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender. 2. Go to System Tools > Backup & Restore page. 3. Click Backup to save a copy of the current settings to your local computer. A config. bin file will be stored to your computer. To restore configuration settings: 1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender. 2. Go to System Tools > Backup & Restore page. 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
31
Chapter 3
Configuring via Web Management Interface
2. Go to
System Tools
>
Firmware Upgrade
page and
confirm the
Hardware Version
.
3. Go to
www.tp-link.com
. Download the latest firmware file for the extender.
Note:
The upgraded firmware version must correspond to the hardware.
4. Click
Browse
to locate the downloaded new firmware file, and click
Upgrade
.
5. Wait a few minutes for the upgrading and rebooting.
Note:
1.
Before upgrading the firmware, it’s better to back up your current settings.
2.
During the upgrading process, do not turn off or reset the extender.
3° 11° 4°
Backup and Restore Configuration Settings
The configuration settings are stored as a configuration file in the extender. You can
back up the configuration file to your computer for future use and restore the extender
to a previous settings from the backup file when needed. Moreover, if needed, you can
erase the current settings and reset the extender to the default factory settings.
To backup configuration settings:
1. Connect to the powerline extender wirelessly. Visit
http://tplinkplc.net
, and log in with
the username and password you set for the extender.
2. Go to
System Tools
>
Backup & Restore
page.
3. Click
Backup
to save a copy of the current settings to your local computer. A
config.
bin
file will be stored to your computer.
To restore configuration settings:
1. Connect to the powerline extender wirelessly. Visit
http://tplinkplc.net
, and log in with
the username and password you set for the extender.
2. Go to
System Tools
>
Backup & Restore
page.