TRENDnet TE100-P1U User Guide - Page 32

TCP/IP Tab, Dynamic IP Address, Fixed IP Address - change ip address

Get TRENDnet TE100-P1U PDF manuals and user guides
UPC - 710931204100
View all TRENDnet TE100-P1U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

TCP/IP Tab Selecting this tab will allow configuration for the TCP/IP network protocol. The basic options are: • Dynamic IP Address (DHCP) - The IP address is obtained automatically, from a DHCP Server on your network. • Fixed IP Address - You must enter the IP address, Subnet Mask, and Gateway Address. • IP Address - Select an unused IP address from the address range used on your LAN. • Subnet Mask - Use the same values as PCs on your LAN (or on the same LAN segment, if you have a Router). • Gateway - Use the same values as PCs on your LAN (or on the same LAN segment, if you have a Router). Some Print Server models also support the Auto-IP function. If the Print Server is set to Dynamic IP Address, but there's no DHCP server found on the network, the Print Server will get an IP from the range of 169.254.1.1 ~ 169.254.254.254 automatically. In this case, even though the Print Server was initialized with an Auto-IP, it will change to DHCP whenever a DHCP server is detected. Figure 24: TCP/IP Screen The TCP session parameters should only be changed if advised to do so by your Network Administrator or Print Server Technical Support. Page 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
TCP/IP Tab
Selecting this tab will allow configuration for the TCP/IP network protocol. The basic options
are:
•
Dynamic IP Address
(DHCP) - The IP address is obtained automatically, from a DHCP
Server on your network.
•
Fixed IP Address
- You must enter the IP address, Subnet Mask, and Gateway Address.
•
IP Address
- Select an unused IP address from the address range used on your LAN.
•
Subnet Mask
- Use the same values as PCs on your LAN (or on the same LAN
segment, if you have a Router).
•
Gateway
- Use the same values as PCs on your LAN (or on the same LAN segment, if
you have a Router).
Some Print Server models also support the Auto-IP function. If the Print Server is set to
Dynamic IP Address
, but there's no DHCP server found on the network, the Print Server will
get an IP from the range of 169.254.1.1 ~ 169.254.254.254 automatically. In this case, even
though the Print Server was initialized with an Auto-IP, it will change to DHCP whenever a
DHCP server is detected.
Figure 24: TCP/IP Screen
The
TCP session
parameters should only be changed if advised to do so by your Network
Administrator or Print Server Technical Support.
Page 29