TRENDnet TE100-P1U User Guide - Page 70

Appendix D NetWare, Overview, Creating an NDPS Manager Object, Appendix D

Page 70 highlights

Appendix D NetWare Overview • The Print Server must be configured as a valid device on your TCP/IP network. This printing method uses LPR over TCP/IP, not the Netware protocol. • To use NDPS (Novell Distributed Printing Services), the Novell server must be running Novell NetWare 5, and the PCs (clients) must be running IntranetWare Client V2.2. or later. The following procedure is designed to enable Public Access Printing under NDPS. Public Access Printing allows anybody on the network to access the printer. Creating an NDPS Manager Object If an NDPS Manager Object already exists, skip this procedure and proceed to Creating an NDPS Printer Agent. 1. Login to NetWare 5.0 Server as Admin and start the NetWare Administrator program Nwadmn32.exe. 2. Select the container on NetWare Administrator where you want the NDPS Manager object to reside. (e.g. TeSupp) 3. Select Create - Object from the menu bar to view the New Object dialog. 4. Select NDPS Manager as the object to create. The Create NDPS Manager Object window shown below will appear. Figure 42: Create NDPS Manager Object 5. Type a name in the NDPS Manager Name.(e.g. SerMGR in Figure 1 above) 6. Browse the Resident Server and select where you want the NDPS Manager object to be assigned. (e.g. TECH_50.TeSupp in figure 1 above) 7. Browse the Database Volume and select where you want the NDPS Manager database to be assigned. (e.g. TECH_50_SYS.TeSupp in figure 1 above) 8. Click Create. The new NDPS Manager will appear in the main browser window. To start the NDPS Manager in future, enter the following command at the console: LOAD NDPSM then select the NDPS Manager object. Page 67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

Appendix D
NetWare
Overview
The Print Server must be configured as a valid device on your TCP/IP network. This
printing method uses LPR over TCP/IP, not the Netware protocol.
To use NDPS (Novell Distributed Printing Services), the Novell server must be running
Novell NetWare 5, and the PCs (clients) must be running IntranetWare Client V2.2. or
later.
The following procedure is designed to enable
Public Access Printing
under NDPS.
Public
Access Printing
allows anybody on the network to access the printer.
Creating an NDPS Manager Object
If an NDPS Manager Object already exists, skip this procedure and proceed to
Creating an
NDPS Printer Agent
.
1.
Login to NetWare 5.0 Server as Admin and start the NetWare Administrator program
Nwadmn32.exe.
2.
Select the container on NetWare Administrator where you want the NDPS Manager object
to reside. (e.g.
TeSupp)
3.
Select
Create - Object
from the menu bar to view the
New Object
dialog.
4.
Select
NDPS Manager
as the object to create. The
Create NDPS Manager Object
window
shown below will appear.
Figure 42: Create NDPS Manager Object
5.
Type a name in the NDPS Manager Name.(e.g. SerMGR in Figure 1 above)
6.
Browse the Resident Server and select where you want the NDPS Manager object to be
assigned. (e.g. TECH_50.TeSupp in figure 1 above)
7.
Browse the Database Volume and select where you want the NDPS Manager database to
be assigned. (e.g.
TECH_50_SYS.TeSupp in figure 1 above)
8.
Click
Create
. The new NDPS Manager will appear in the main browser window.
To start the NDPS Manager in future, enter the following command at the console:
LOAD NDPSM
then select the NDPS Manager object.
Page 67