TRENDnet TE100-P1U User Guide - Page 44
IPP Client Setup - Windows 98/ME, Installing from the CD-ROM, Installing using IPP_CLIENT.EXE
UPC - 710931204100
View all TRENDnet TE100-P1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
IPP Client Setup - Windows 98/ME For these platforms, IPP Client software is supplied on the CD-ROM. Also you can distribute the setup program (IPP_CLIENT.EXE) to users vial E-mail. Installing from the CD-ROM 1. Insert the CD-ROM in your drive. If the program does not start automatically, run the SETUP program in the top-level folder. 2. Follow the prompts until you reach the Select Installation screen, and select IPP Client. 3. At the next screen, select the Install IPP Client option. 4. Click Next, and step though the remaining screens to complete the installation. Installing using IPP_CLIENT.EXE 1. Run this program to unzip the included files. 2. The IPP Setup program will then run. 3. Follow the prompts to complete the installation. IPP Client Configuration 1. Run the "Add IPP Port" program entry created by the installation. A screen like the following will be displayed. Figure 33: IPP Port 2. If Internet access from your location is via a Proxy Server, check Access IPP Server via Proxy Server, and enter details of your Proxy Server. (This will be the same as your Browser configuration.) 3. Enter the IP Address or URL of the IPP Server. 4. Click Select Device Port to view the available ports on the IPP Server, and select the appropriate port. A connection to the IPP Server will be established at this time. 5. Click Save to create the IPP port on your system. You will see a message confirming that the port has been created, then the following dialog: Page 41