TRENDnet TE100-P1U User Guide - Page 41

Con Server, Other Screens, Server Status, Printer Ports - password

Get TRENDnet TE100-P1U PDF manuals and user guides
UPC - 710931204100
View all TRENDnet TE100-P1U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Configure Server Figure 32: Configure Server Screen Print Server Name Change the default name if you wish. The new name must not contain any spaces or blanks. Password Enter the device password, and again in the Verify field. Once a password is entered, it is required in order to gain access and change the configuration. Enable Protocols Non-TCP/IP may be disabled if they are not required on your LAN. The available protocols depend on the Print Server model. Other Screens Server Status This screen shows server system data and the current settings for all of the other screens. It is read-only; no data can be input on this screen. Printer Ports This screen displays the current status of each port. For each port, the following data is listed: • Connected Printer- the model name of the printer connected to the port, if the printer name is known. (If the printer is not bi-directional, this information is unavailable.) • Status - the current status of the printer (On-line, Off-line, Out of paper) • Printing Information - this will show either Idle or Printing. Page 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Configure Server
Figure 32: Configure Server Screen
Print Server Name
Change the default name if you wish. The new name must not
contain any spaces or blanks.
Password
Enter the device password, and again in the
Verify
field. Once a
password is entered, it is required in order to gain access and
change the configuration.
Enable Protocols
Non-TCP/IP may be disabled if they are not required on your LAN.
The available protocols depend on the Print Server model.
Other Screens
Server Status
This screen shows server system data and the current settings for all of the other screens. It is
read-only; no data can be input on this screen.
Printer Ports
This screen displays the current status of each port. For each port, the following data is listed:
•
Connected Printer
- the model name of the printer connected to the port, if the printer
name is known. (If the printer is not bi-directional, this information is unavailable.)
•
Status
- the current status of the printer (On-line, Off-line, Out of paper)
•
Printing Information
- this will show either
Idle
or
Printing
.
Page 38