TRENDnet TE100-P1U User Guide - Page 37
Web-Based Management, Overview, Preparation - on windows 7
UPC - 710931204100
View all TRENDnet TE100-P1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Chapter 6 Web-Based Management This chapter explains how to use your Web Browser to configure the Print Server Overview The Print Server incorporate the HTTP server. This allows you to connect to the Print Server and configure it using your Web Browser. Most browsers should work, provided they support tables and forms. Preparation Because it supports dynamic IP Address allocation using DHCP, BOOTP, or RARP, the Print Server ships with an IP Address of 0.0.0.0. This is NOT a valid IP Address. Therefore, you must do ONE of the following: • Check your DHCP server (if you have one), and determine the IP Address allocated to the Print Server. • Use the Setup Wizard, BiAdmin or another Print Server utility to allocate a valid IP Address to the Print Server. • Add an entry to the arp table to associate the hardware address of the Print Server with the desired IP address, as follows: arp -s IP_Address 00:c0:02:xx:xx:xx (Unix) arp -s IP_Address 00-c0-02-xx-xx-xx (Windows) Where: IP_Address is the IP Address you wish to assign to the Print Server. 00:c0:02:xx:xx:xx is the hardware address of the Print Server. Example (Unix): arp -s 192.168.0.21 00:c0:02:12:34:56 Example (Windows): arp -s 192.168.0.21 00−c0−02−12−34−56 Note: The hardware address of the Print Server is shown on a sticker on the base of the device. Page 34