TRENDnet TE100-P1U User Guide - Page 67
LPD on Linux, Printer_name, PS_NAME, Logical_Printer_name, Spooler_directory, Control Panel
![]() |
UPC - 710931204100
View all TRENDnet TE100-P1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Where: Printer_name is the Print Queue name used to store jobs for the corresponding logical printer. PS_NAME is the Print Server name defined in /etc/hosts. Logical_Printer_name is the logical printer name on the Print Server. (e.g. L1) Spooler_directory is the directory you created in Step 6. Example: Marketing|RP1_PS123456:\ [TAB] :lp=:\ [TAB] :rm=PS_Rm203:\ [TAB] :rp=L1:\ [TAB] :sd=/usr/spool/Marketing:\ [TAB] :mx#0: Repeat this process for each Logical Printer/Print Queue combination that you wish to create. LPD on Linux If using the command line, the procedure is the same as for System V. (above) On recent Linux distributions, you can use the graphical X-windows interface instead of the command line. The procedure is described below, but may vary according to your version of Linux. 1. Start your X-windows shell. 2. Select Control Panel, then Printer Configuration. 3. Select Add. For the printer type, select Remote Unix (lpd) Queue. 4. Use the following data to complete the resulting dialog. Field Name Spool Directory File Limit Remote Host Remote Queue Data Enter a name for this printer /var/spool/lpd/name_of_printer 0 (no limit) Name or IP Address of Print Server e.g. SC3000014 Note: host file entry is required to use the name instead of IP Address Ln Where n is the Logical Printer number By default, L1 is port 1, and L2 is port 2 if the Print Server has 2 ports. 5. Save this data, and exit the Printer Configuration. Configuration is now completed, and the printer is now available for use. Page 64
![](/manual_guide/products/trendnet-te100p1u-user-guide-d0c474f/67.png)