TRENDnet TV-IP320PI User's Guide - Page 35
X, IP Address Filter, 1X Authentication, Enable IEEE, EAPOL version, User Name, Password, Confirm
View all TRENDnet TV-IP320PI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
TRENDnet User's Guide 802.1X Setup 802.1X for remote authentication service. TV-IP320PI IP Address Filter Set up a list of clients allow only the clients on the list to access this camera or to reject clients on the list from access this camera. 802.1X Authentication Enable IEEE Check this box to enable 802.1X authentication 802.1X: service. EAPOL version: Extensible Authentication Protocol (EAP) over LAN (EAPoL). Choose version 1 or 2. This version number has to match to your 802.1X service EAPOL version. User Name: Enter the account name. Password: Enter the password. Confirm: Enter the password again. Click Save to save the changes © Copyright 2014 TRENDnet. All Rights Reserved. IP Address Filter Enable IP Address Filter: IP Address Filter Type: Add: Modify: Check this box to enable IP address filtering service. Choose Forbidden to ban the listed IP addresses or Allowed to allow listed host to access this camera. Click Add to add a user account To modify an entry on the list, highlight the entry by clicking on it. Then, click the Modify button. Delete: Clear: Enter the IP address then click OK To delete an entry on the list, highlight the entry by clicking on it. Then, click Delete To clear all entries, click Clear Click Save to save the changes 35