TRENDnet TV-IP320PI User's Guide - Page 39

Video Standard, Switch Time

Get TRENDnet TV-IP320PI PDF manuals and user guides View all TRENDnet TV-IP320PI manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

TRENDnet User's Guide Light sensitivities Smart IR: Smart IR can adjust the strength of infrared lights at night depending on the distance of an object to maintain the maximum IR light distance and while maintaining a clear picture when object is close by. Default: On. Max. Exposure Adjust this value for exposure time for Time: each picture. You can choose a value between 1/3 second to 1/100,000 second. The default value is 1/30 second exposure time for each picture. Video Standard: Day/Night Switch: This is the base frequency for the video refresh rate. It is recommended to set to the same frequency of your local video standard (NTSC: 60, PAL: 50). Default: 60Hz. Choose whether you want the camera to be set to the day mode (color video) or night mode (IR enhanced black/white video). You can manually set it to day mode or night mode, adjust by lighting (Auto), or pre-define schedule. Auto: Sensitivity: The light sensor sensitivity. Switch Time: The time delayed to switch between modes. Longer switch time can prevent unnecessary mode flipping if an object is blocking the light source temporarily. Range: 5-120 seconds, default: 5 seconds. TV-IP320PI Schedule: Use quick selection or enter the time down below. Click OK to confirm the time you want to set. Start Time: The start time for day mode. Stop Time: The start time for day mode. Position adjustments Mirror: Choose horizontal, vertical or both to adapt to the physical position of installation. © Copyright 2014 TRENDnet. All Rights Reserved. 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
TRENDnet User’s Guide
TV-IP320PI
© Copyright 2014 TRENDnet. All Rights Reserved.
39
Light sensitivities
Smart IR:
Smart IR can adjust the strength of infrared lights at
night depending on the distance of an object to
maintain the maximum IR light distance and while
maintaining a clear picture when object is close by.
Default: On.
Max. Exposure
Time:
Adjust this value for exposure time for
each picture. You can choose a value
between 1/3 second to 1/100,000
second. The default value is 1/30 second
exposure time for each picture.
Video Standard:
This is the base frequency for the video refresh rate. It
is recommended to set to the same frequency of your
local video standard (NTSC: 60, PAL: 50). Default:
60Hz.
Day/Night
Switch:
Choose whether you want the
camera to be set to the day mode
(color video) or night mode (IR
enhanced black/white video). You
can manually set it to day mode or
night mode, adjust by lighting
(Auto), or pre-define schedule.
Auto:
Sensitivity:
The light sensor sensitivity.
Switch Time:
The time delayed to switch between
modes. Longer switch time can prevent unnecessary
mode flipping if an object is blocking the light source
temporarily. Range: 5-120 seconds, default: 5
seconds.
Schedule:
Use quick selection or enter the time down below.
Click
OK
to confirm the time you want to set.
Start Time:
The start time for day mode.
Stop Time:
The start time for day mode.
Position adjustments
Mirror:
Choose horizontal, vertical or both to adapt to the
physical position of installation.