Thermador CIT36XWB Instructions for Use - Page 14
Operating the Appliance
![]() |
View all Thermador CIT36XWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Operating the Appliance This chapter explains how to set a cooking position. The table shows heat settings and cooking times for various meals. First-time use When you switch on the appliance for the first time, the menu for selecting the initial settings appears on the display. Select the settings you require. Once you have confirmed these settings, the main screen will appear. Note: You can change the settings at any time. For information on how to select these settings, see the section entitled ~ "Basic Settings". Switching the cooktop on and off Use the main switch to switch the cooktop on and off. Switch on: Touch the ON l OFF button. The indicator above the main switch will light up. After a short time, the cooktop will be ready for operation. Switch off: Touch the ON l OFF button. The indicator will switch off. All cooking positions are switched off. The residual heat indicator will remain lit until the cooking positions have cooled down sufficiently. Notes ▯ The cooktop switches off automatically if the cooking positions have been switched off for more than 30 seconds. ▯ The selected settings will be stored for 10 minutes after the cooktop has been switched off. If you switch the cooktop back on during this time, the option to confirm the previous settings appears on the main screen. For information on this setting, see the section entitled ~ "Basic Settings" Setting a cooking position The required power level is selected in the settings area. Power level 1.0 Power level 9.0 = lowest setting = highest setting Each power level has an intermediate level, which is marked with.5. Notes ▯ To protect the fragile parts of your appliance from overheating and electrical overloading, the cooktop may temporarily reduce the power automatically. ▯ In order to prevent the appliance from producing excess noise, the cooktop may temporarily reduce the power automatically. Selecting a cooking position and power level The cooktop must be switched on. 1. Place the cookware on the cooking surface. 2. Touch the # symbol for the cooking position on the touchscreen display. The settings area will light up on the cooking position display. 3. Within the next 4 seconds, scroll up with your finger and select the power level you require. To select power level 9.0, tap 9.0 directly. K PLQ The power level is set. Changing the power level Select the cooking position and then select the required power level in the settings area. Switching off a cooking position Touch and hold the cooking position display until power level ó.ó is displayed in the settings area. The cooking position will switch off. Note: If you place cookware on the cooking surface before switching on the cooktop, this will be detected when you touch the main switch, and the indicator for the cooking position will appear on the touchscreen display. 14
![](/manual_guide/products/thermador-cit36xwbb-instructions-use-313d8c1/14.png)