Thermador CIT36XWB Instructions for Use - Page 30

Panel Lock The Panel Lock function enables you to lock the cooktop to prevent it from being switched on accidentally. Note: If one of the cooking positions is switched on, you will not be able to activate the Panel Lock function. Activation The cooktop must be switched on. Touch and hold the 1 symbol for approx. 4 seconds. The 1 symbol will light up. The Panel Lock is now activated. The cooktop is locked. Deactivating The cooktop must be switched on. Touch and hold the 1 symbol for approx. 4 seconds. The 1 symbol will light up. The Panel Lock is now deactivated. The cooktop is unlocked. Automatic Panel Lock This function automatically activates the Panel Lock whenever the cooktop is switched off. Activating and deactivating You can find out how to activate the automatic Panel Lock in the section entitled ~ "Basic Settings" Note: To deactivate the automatic Panel Lock, touch and hold the 1 symbol for approx. 4 seconds. Pause function When the Pause function is activated, the settings you have selected appear in the display. No power level is used and the cooking times you have set are stopped. If the Kitchen Timer or Stopwatch Timer has been activated, it will continue running. If the Pause function has been activated, the timer duration cannot be changed. The Pause function has no effect on the main switch. You can switch the cooktop off at any time. Activation Touch the a symbol to pause. The cooktop will be locked for 30 minutes. You can now clean the surface of the touchscreen display, for example, without altering the settings. Note: The a symbol will only be displayed in the function bar, if cooking has been started. Deactivating The cooktop will switch off automatically after 30 minutes. To switch the function off and resume cooking before 30 minutes have elapsed, touch the < symbol and then the 8 symbol to confirm. Note: If you move the cookware across the cooking surface while the function is activated, the settings may all be lost. Automatic Shutoff If a cooking position is in operation for a long time and none of the settings are changed, the automatic safety switch-off function is activated. This stops the cooking position from heating up. A message will appear on the display. Touch the 8 symbol. The cooking position settings can now be reconfigured. The point at which the automatic safety switch-off function is activated depends on the power level that has been set (after 1 to 10 hours). Basic Settings The appliance has various basic settings. You can adapt these settings to your personal requirements. Settings ' Brightness Start screen Sounds SapphireGlow™ function Description and options You can change the brightness of the touchscreen display. You can choose whether or not you want the brand logo to be displayed when you switch on the cooktop. You can configure the type, volume and length of the signal tones you want the appliance to sound. Specify whether or not you want to use the SapphireGlow™ function. MyZone™ - power levels CAL Cooking sensor calibration Cooking sensor paring You can change the default power levels of the cooking areas for the mode "My Zone - Dynamic cooking for one item of cookware". Set your height above sea level to adjust the boiling point. Connect the wireless cooking sensor to the cooktop. 30