Thermador CIT36XWB Instructions for Use - Page 43
Troubleshooting
View all Thermador CIT36XWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Bubbles are forming with an uneven distribution within the cookware. Depending on the power level that is selected, the type of cookware or the combination with other cookware, bubbles may form unevenly. This does not affect the temperature or the cooking process. For information on the type, size and positioning of the cookware, see the section entitled ~ "Cooking with Induction". -------- Cleaning How do I clean the cooktop? You can achieve the best results by using special glass-ceramic cleaning products. Do not use harsh or abrasive cleaning products, dishwater detergent (concentrated) or scouring pads. For more information on cleaning and caring for your cooktop, see the section entitled ~ "Cleaning and Maintenance" -------- Home network Why will the cooktop not connect to the home network after the WPS button has been pressed on the router? Once the "Connect automatically" option has been selected, press the WPS button on the router within the next 2 minutes. If this time has already elapsed, repeat the connection procedure. If the problems persist, restore the appliance to factory settings; see the section entitled ~ "Basic Settings". Why is my mobile device not logging into the Home Connect network? Use the SSID "HomeConnect" and password "HomeConnect" to connect. Make sure that you have entered all the characters correctly and that you have used upper and lower case in the relevant places. -------- Troubleshooting If a problem or fault occurs in the appliance, instructions, alerts, warnings or fault messages will be shown on the display. 9 CAUTION Repairs should only be done by an authorized servicer. Improper repair of your appliance may result in risk of severe physical injury or death. Notes ▯ The top line of the display lights up red. ▯ A fault code is displayed with some fault messages (e.g. [E0513]) ▯ If a fault occurs, the appliance will not switch to standby mode. ▯ For more information, see the section entitled ~ "Frequently-asked questions and answers (FAQ)" Warnings and fault messages Warnings are displayed if an internal fault has occurred that will compromise use of the cooktop. Follow the instructions in the display and touch the 8 symbol to return to the main screen. Fault messages are displayed if an internal fault or malfunction has occurred that makes it impossible to use the cooktop. Disconnect the appliance from the power supply and then wait for a few seconds before reconnecting it. If the message reappears, contact Customer Support. Please state the fault code, as well as the complete model number and serial number (or FD) from the rating label when you call Customer Support. 43