Home » Thermador Manuals » Cooktops » Thermador CIT36XWB » Manual Viewer

Thermador CIT36XWB Instructions for Use - Page 31

Cooktop - Hood Sync

Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Temperature format You can change the temperature format. Language You can change the language used in the display. Appliance index and production date Automatic restore Presettings You can view information about your appliance. You can set how long the appliance saves the most recently used settings after it has been switched off. You can restore all settings to the factory settings. Panel Lock $ Cooktop - Hood Sync ( Home Connect You can use the Panel Lock to lock the cooktop and prevent children from using it without supervision. The extractor hood can be controlled from the cooktop either by connecting the two appliances in the home network or by connecting the extractor hood directly to the cooktop. This enables you to connect the appliance to your home network and a mobile end device. To go to the basic settings All cooking positions must be deactivated. 1. Touch the " symbol. The basic settings menu will appear on the display. 2. The default setting is brightness. Use your finger to scroll to the left or right and select a different setting. 4. Change the selected setting. %ULJKWQHVV %ULOOR 3. To change the selected setting, touch the ù symbol. 5. Touch the 8 symbol to confirm your choice. The settings are saved. To cancel and exit the menu, touch the 9 symbol. Exiting the basic settings menu To exit the basic settings, touch the 9 symbol. %ULJKWQHVV 31

Section	Page
Table of Contents Use and care manual	3
9 Safety DefinitionsSafety Definitions	4
9 WARNING	4
9 CAUTION	4
NOTICE:	4
Note:	4
IMPORTANT SAFETY INSTRUCTIONS	5
READ AND SAVE THESE INSTRUCTIONS	5
WARNING	5
Fire Safety	5
WARNING	5
to reduce the risk of a grease fire:	5
a. Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings.	5
b. Always turn hood ON when cooking at high heat or when flambéing food (i.e. Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambé).	5
c. Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter.	5
d. Use proper pan size. Always use cookware appropriate for the size of the surface element.	5
WARNING	5
TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A GREASE FIRE, OBSERVE THE FOLLOWING:	5
a. SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.	5
b. NEVER PICK UP A FLAMING PAN – You may be burned.	5
c. DO NOT USE WATER, including wet dishcloths or towels – a violent steam explosion will result.	5
d. Use an extinguisher ONLY if:	5
Cooking Safety	5
WARNING	5
CAUTION	5
WARNING	6
Risk of injury	6
WARNING	6
Risk of injury	6
Burn Prevention	6
WARNING	6
Risk of burns	6
WARNING	6
Risk of burns	6
Child Safety	6
CAUTION	6
Cleaning Safety	6
Cookware Safety	6
WARNING	7
RISK of injury	7
WARNING	7
Danger of injury	7
Proper Installation and Maintenance	7
Electromagnetic interference	7
WARNING	7
This induction cooktop generates and uses ISM frequency energy that heats cookware by using an electromagnetic field. It has been tested and complies with Part 18 of the FCC Rules for ISM equipment. This induction cooktop meets the FCC requirements ...	7
CAUTION	7
WARNING	7
Hazard due to magnetism	7
Cooling fan	7
Proposition 65 Warning:	8
Causes of damageCauses of damage	9
NOTICE:	9
Overview	9
Protecting the Environment	9
Energy-saving Advice	9
Cooking with Induction	10
Advantages of Induction Cooking	10
Cookware	10
Unsuitable cookware	10
Properties of the base of the cookware	10
No cookware/cookware of an unsuitable size	10
Empty cookware or cookware with a thin base	10
Pot detection	11
Note:	11
Familiarizing yourself with your applianceFamiliarizing yourself with your appliance	11
Note:	11
Cooking surface	11
Note:	11
The control panel	11
Buttons	11
Notes	11
Touchscreen display	12
Overview of the Menus	12
Main screen	12
Function bar	12
Info menu	12
Notifications and alerts	12
Note:	12
Note:	12
Cookware mode menu	12
Cooking Position Display	13
SapphireGlow™	13
Residual Heat Indicator	13
Operating the Appliance	14
First-time use	14
Note:	14
Switching the cooktop on and off	14
Notes	14
Setting a cooking position	14
Notes	14
Selecting a cooking position and power level	14
1. Place the cookware on the cooking surface.	14
2. Touch the # symbol for the cooking position on the touchscreen display. The settings area will light up on the cooking position display.	14
3. Within the next 4 seconds, scroll up with your finger and select the power level you require.	14
Changing the power level	14
Switching off a cooking position	14
Note:	14
Chef's recommendations	15
Recommendations	15
Cooking table	15
Timer functionsTimer functions	17
Cook Timer	17
Setting the Cook Timer	17
1. Select the cooking position and the required power level.	17
2. Touch the selected power level. The + symbol will light up in the cooking position display.	17
3. Touch the + symbol. 00\|00 ‹ will light up on the cooking position display.	17
4. Then select the required cooking time in hours and minutes.	17
5. Touch the < symbol to confirm the selected time. The time you have set will appear in the cooking position display.	17
Cooking Sensor mode	17
Changing or deleting the time	17
When the time has elapsed	17
Stopwatch Timer	17
Activating the Stopwatch Timer	17
Pausing the Stopwatch Timer	18
Deactivating	18
Note:	18
Kitchen Timer	18
Setting the Kitchen Timer	18
1. Touch the TIMERS touch button.	18
2. Touch the . symbol and confirm your choice by touching the 8 symbol. óóEóó.óóÕ will light up in the display.	18
3. Within the next 10 seconds, scroll up or down with your finger and set the time in minutes, hours and seconds.	18
4. Touch the < symbol to confirm your chosen setting. The . symbol and the selected time will light up in the function bar.	18
Changing or deleting the time	18
Pausing the Kitchen Timer	18
When the time has elapsed	18
PowerBoost® Function	19
Activating	19
Deactivating	19
Note:	19
PanBoost™ Function	19
Recommendations for use	19
Activating	19
Deactivating	20
Note:	20
Keep Warm	20
Activating	20
Deactivating	20
Transfer function	20
Activation	20
1. Place an item of cookware on the cooking surface.	20
2. Touch the ˆ symbol on the new cooking position to confirm transfer of the settings. The power level will light up.	20
Wireless Cooking Sensor	20
Preparing and caring for the wireless cooking sensor	20
Gluing on the silicone patch	20
1. The part of the cookware to which the patch is to be adhered must be free of grease. Clean the pan, dry it thoroughly and wipe the area where the patch is to be adhered with an all purpose degreasing agent.	20
2. Remove the protective film from the silicone patch. Adhere the silicone patch in the correct place on the outside of the pot using the supplied template as a guide.	20
3. Press down all over the surface of the silicone patch, including in the center.	20
Notes	20
Attaching the wireless cooking sensor	21
Notes	21
Connecting the wireless cooking sensor to the control panel	21
1. Touch the \	21
2. Select the Cooking sensor pairing option and then touch the 8 symbol to confirm.	21
3. Briefly touch the ¨ symbol on the wireless cooking sensor within the next 30 seconds.	21
4. To connect a different cooking sensor, touch the 8 symbol. To return to the basic settings, touch the 9 symbol.	21
Notes	21
Resetting the wireless cooking sensor	21
1. Touch and hold the ¨ symbol on the cooking sensor for 8-10 seconds.	21
2. Repeat the connection procedure.	21
Cleaning	21
Wireless cooking sensor	21
Silicone patch	21
Note:	21
Cooking sensor window	21
Notes	21
Replacing the battery	22
1. Remove the silicone cover from the lower section of the cooking sensor casing and remove both screws using a screwdriver.	22
2. Open the cap on the cooking sensor. Remove the battery from the lower section of the casing and insert a new battery (make sure that the battery terminals (+/ -) are the right way round).	22
9 CAUTION	22
3. Close the cap on the cooking sensor (the indentations for the screws on the cap must be aligned with the indentations on the lower section of the casing). Tighten the screws with a screwdriver.	22
4. Put the silicone cover back on the lower section of the cooking sensor casing.	22
Note:	22
Declaration of Conformity	22
1. this device may not cause interference, and	22
2. this device must accept any interference, including interference that may cause undesired operation of the device.	22
Note:	22
Cooking Sensor Mode	23
Cooking processes with the cooking sensor	23
Temperature °F (°C)	23
Cookware	23
Suitable for	23
Advantages	24
Notes	24
Tips for cooking with Cooking Sensor mode	24
Notes	24
Setting the boiling point	24
Note:	24
Setting procedure	24
1. Attach the wireless cooking sensor to the cookware; see the section entitled ~ \	24
2. Fill the cookware with a sufficient amount of liquid, put the lid on and place it on the cooking surface. See the section entitled ~ \	24
3. Tap the cooking position display for the cookware.	24
4. Touch the ¢ symbol.	24
5. Use your finger to scroll up to the n symbol. Then touch the 8 symbol to confirm your choice.	24
6. Touch the ¨ symbol on the wireless cooking sensor as shown on the display.	24
7. Select the temperature level.	25
8. Once the signal tone has sounded, remove the lid and add the food. Leave the lid on while cooking.	25
Note:	25
Deactivating	25
1. Touch the temperature level.	25
2. Touch the ¢ symbol and select a different cookware mode in the settings area.	25
3. Touch the 8 symbol to confirm your choice.	25
Table	25
195 (90)	25
10 - 20	25
212 (100)	25
20 - 30	25
212 (100)	25
60 - 90	25
212 (100)	25
60 - 90	25
240 (115)	25
15 - 25	25
240 (115)	25
15 - 25	25
340 (170)	25
10 - 15	25
340 (170)	25
10 - 15	25
195 (90)	25
15 - 20	25
340 (170)	25
10 - 15	25
340 (170)	25
10 - 15	25
212 (100)	26
5 - 10	26
212 (100)	26
10 - 20	26
212 (100)	26
10 - 20	26
212 (100)	26
5 - 10	26
212 (100)	26
30 - 40	26
212 (100)	26
15 - 30	26
212 (100)	26
60 - 90	26
212 (100)	26
15 - 20	26
212 (100)	26
45 - 60	26
240 (115)	26
3 - 6	26
240 (115)	26
25 - 35	26
240 (115)	26
25 - 35	26
240 (115)	26
10 - 20	26
340 (170)	26
4 - 8	26
340 (170)	26
4 - 8	26
340 (170)	26
4 - 8	26
340 (170)	26
4 - 8	26
185 (85)	26
30 - 40	26
212 (100)	26
3 - 6	26
212 (100)	26
30 - 45	26
212 (100)	26
30 - 45	26
240 (115)	26
10 - 20	26
240 (115)	26
10 - 20	26
320 (160)	26
8 - 12	26
185 (85)	27
5 - 10	27
195 (90)	27
25 - 35	27
195 (90)	27
45 - 55	27
195 (90)	27
8 - 12	27
195 (90)	27
20 - 30	27
195 (90)	27
10 - 12	27
185 (85)	27
3 - 8	27
212 (100)	27
7 - 10	27
212 (100)	27
3 - 5	27
212 (100)	27
7 - 10	27
212 (100)	27
15 - 20	27
212 (100)	27
5 - 8	27
240 (115)	27
6 - 8	27
240 (115)	27
12 - 18	27
195 (90)	27
10 - 15	27
212 (100)	27
60 - 90	27
212 (100)	27
5 - 10	27
240 (115)	27
20 - 30	27
185 (85)	27
40 - 50	27
185 (85)	27
10 - 15	27
185 (85)	27
3 - 5	27
212 (100)	27
15 - 25	27
320 (160)	27
5 - 10	27
320 (160)	27
5 - 10	27
320 (160)	27
5 - 10	27
155 (70)	28
15 - 20	28
212 (100)	28
15 - 30	28
350 (180)	28
4 - 8	28
155 (70)	28
10 - 20	28
155 (70)	28
5 - 15	28
185 (85)	28
3 - 10	28
MyZone™	28
Notes	28
Activation	28
1. Tap the cooking position display for the cookware.	28
2. Touch the ¢ symbol.	28
3. Use your finger to scroll down to the symbol. Then touch the 8 symbol to confirm your choice.	28
4. Move the cookware over the cooking surface until the power level you require is set. The power level you have selected will appear on the cooking position display.	28
Note:	28
Changing the power level	29
Note:	29
Deactivating	29
1. Touch the power level.	29
2. Touch the ¢ symbol and select a different cookware mode in the settings area.	29
3. Touch the 8 symbol to confirm your choice.	29
TeppanyakiPro™ Mode	29
Note:	29
Suitable cookware	29
Activation	29
1. Touch the cooking position display.	29
2. Touch the ¢ symbol.	29
3. Scroll upwards with your finger until you reach the symbol for the teppanyaki griddle on the cooking surface.	29
Note:	29
4. Select the power level you require from the settings area.	29
Changing the power level	29
Note:	29
Deactivating	29
1. Touch the power level.	29
2. Touch the ¢ symbol and select a different cookware mode in the settings area.	29
3. Touch the 8 symbol to confirm your choice.	29
Panel Lock	30
Note:	30
Activation	30
Deactivating	30
Automatic Panel Lock	30
Activating and deactivating	30
Note:	30
Pause function	30
Activation	30
Note:	30
Deactivating	30
Note:	30
Automatic Shutoff	30
Basic Settings	30
’	30
CAL	30
--------	31
1. Touch the \	31
2. The default setting is brightness. Use your finger to scroll to the left or right and select a different setting.	31
3. To change the selected setting, touch the ù symbol.	31
4. Change the selected setting.	31
5. Touch the 8 symbol to confirm your choice.	31
Exiting the basic settings menu	31
Home Connect	32
Notes	32
Connection to your home network	32
Setting up the Home Connect app	32
Note:	32
1. On your mobile device, go to the App Store (Apple devices) or to the Google Play Store (Android devices).	32
2. Enter \	32
3. Select the Home Connect app and install it on your mobile device.	32
4. Start the app and create your Home Connect login details. The app will guide you through the registration process. Make a note of your e-mail address and password.	32
Automatic Registration in the Home Network	32
1. To open the basic settings, touch the \	32
2. Scroll left or right with your finger and select the E Home Connect setting.	32
3. The conditions needed to establish a Home Connect connection will be displayed. Touch the 8 symbol to confirm.	32
4. Select the Automatic option and touch the 8 symbol to confirm your choice.	32
5. Press the WPS button on your router within 2 minutes, as shown on the display.	32
6. A message will be displayed to notify you when the cooktop is successfully connected to your home network. Confirm by touching the 8 symbol.	32
7. Now open the Home Connect app on your mobile device and follow the connection instructions on the display.	32
8. A message will be displayed to confirm that connection to the app has been successful. Touch the 8 symbol to confirm.	33
Note:	33
Manual Registration in the Home Network	33
1. To open the basic settings, touch the \	33
2. Scroll left or right with your finger and select the E Home Connect setting.	33
3. The conditions needed to establish a Home Connect connection will be displayed. Touch the 8 symbol to confirm.	33
4. Select the Manual option and confirm by touching the 8 symbol.	33
5. A message will appear on the display for opening the network settings of the mobile device. Touch the 8 symbol to confirm.	33
6. You now have 5 minutes to register the mobile device with the SSID \	33
7. Then open the Home Connect app on your mobile device.	33
8. A message will be displayed to notify you when the cooktop is successfully connected to your home network. Confirm by touching the 8 symbol.	33
9. Now open the Home Connect app on your mobile device and follow the connection instructions on the display.	33
10. A message will be displayed to confirm that connection to the app has been successful. Touch the 8 symbol to confirm.	34
Note:	34
Home Connect Settings	34
E	34
ø	34
}	34
ú	34
--------	34
Wi-Fi symbols	34
E	34
Deactivate Wi-Fi	34
Note:	34
1. To open the basic settings, touch the \	34
2. Scroll left or right with your finger and select the E Home Connect setting.	34
3. Select the Connection option.	35
4. Select the Off option.	35
Disconnecting from your home network	35
Note:	35
1. To open the basic settings, touch the \	35
2. Scroll left or right with your finger and select the E Home Connect setting.	35
3. Select Delete network settings.	35
Note:	35
Connecting to your home network	35
1. To open the basic settings, touch the \	35
2. Scroll left or right with your finger and select the E Home Connect setting.	35
3. Select Connection.	35
4. Follow the instructions in the section entitled \	35
Connect to App	35
Notes	35
1. To open the basic settings, touch the \	35
2. Scroll left or right with your finger and select the E Home Connect setting.	35
3. Touch Connect with app.	35
4. Follow the instructions in the app to complete the connection process.	35
Settings via app	35
Notes	35
1. To open the basic settings, touch the \	35
2. Scroll left or right with your finger and select the E Home Connect setting.	35
3. Touch Settings via app.	36
4. To activate the settings transfer option, touch Yes; to deactivate the settings transfer option, touch No.	36
Confirming settings	36
Software Update	36
Notes	36
Information on Data Protection	36
Note:	36
Wi-Fi® Module	36
FCC COMPLIANCE STATEMENT	36
9 CAUTION	36
1. This device may not cause harmful interference, and	36
2. This device must accept any interference received, including interference that may cause undesired operation.	36
INDUSTRY CANADA STATEMENT	36
1. This device may not cause interference, and	36
2. This device must accept any interference, including interference that may cause undesired operation of the device.	36
Cooktop - Hood Sync	37
Notes	37
Setting up a connection	37
Connecting directly	37
Note:	37
1. To open the basic settings, touch the \	37
2. Use your finger to scroll to the left or right and select the A Cooktop - Hood Sync setting.	37
3. Select the \	37
4. You have 2 minutes to initiate the connection process on the hood. See hood operating instructions.	37
Connecting via your home network	37
1. To open the basic settings, touch the \	37
2. Use your finger to scroll to the left or right and select the A Cooktop - Hood Sync setting.	37
3. Select the Home Connect option and touch the 8 symbol to confirm.	37
4. Press the WPS button on the router within the next 2 minutes.	38
5. You have 2 minutes to initiate the connection process on the hood. See hood operating instructions.	38
Note:	38
Disconnecting from the network	38
1. To open the basic settings, touch the \	38
2. Use your finger to scroll to the left or right and select the A Cooktop - Hood Sync setting.	38
3. Select Disconnect from network and touch the 8 symbol to confirm.	38
Note:	38
Controlling the hood via the cooktop	38
Setting the fan	38
Activation	38
1. Touch the A symbol on the main screen.	38
2. Select the A Cooktop - Hood Sync option.	38
3. Select the fan level in the settings area. The following settings are possible:	38
Deactivating	38
Setting Automatic Mode	38
Activation	38
1. Touch the A symbol on the main screen.	38
2. Select the A Cooktop - Hood Sync option.	38