Thermador HMWB36WS View Kitchen Design and Planning Guide - Page 13

| THERMADOR | RANGES | THERMADOR | RANGES PRO HARMONY® PLANNING INFORMATION Professional Ranges Model Options There are three sizes of Thermador Pro Harmony Ranges to choose from - 48-inch, 36-inch and 30-inch. Models are available in your choice of all-gas, dual-fuel or induction/electric configurations. Pro Harmony Ranges feature a compact, 24-inch deep design in stainless steel with a porcelain cooktop surface. Ranges are LP convertible by ordering the specified kit. Be sure to reference the correct model information in this design guide. Installation Considerations The information in this design guide provides key features, product dimensions, cutouts and installation specifications. Before installing a Thermador Pro Harmony Range, be sure to verify the cutout dimensions and electrical / gas connections. Installation instructions are subject to change. Always consult with the installation manual included with the product for complete details prior to the installation. Installation Options Thermador Pro Harmony® Ranges feature a bold, professional design and a compact, 24-inch depth profile that creates a seamless look within standard cabinetry. These ranges can be installed in a wall or island installation. Ventilation Requirements We strongly recommend that a Thermador Professional® Wall or Island Hood or Custom Insert be installed with all Thermador Pro Harmony Ranges. Reference the selection guide in the ventilation section for compatible Thermador hoods. Downdraft ventilation should not be used. Do not install a microwave-hood combination above the cooktop, as these types of units do not provide the proper ventilation and are not suitable for use with Thermador Pro Harmony Ranges. Important Ventilation Notes: • For wall installations, the hood width must, at a minimum, equal the nominal width of the appliance cooking surface. Where space permits, a hood larger in width than the cooking surface may be desirable for improved ventilation performance. • For island installations, the hood width should, at a minimum, overhang the appliance cooking surface by 3" on each side. • Due to the high heat capability of these ranges, particular attention should be paid to the hood and duct work installation to assure it meets local building codes. • For best smoke elimination, the lower edge of the hood should be installed 30"- 36" above the appliance cooking surface. • If the hood contains any combustible materials (i.e., a wood covering), it must be 36" or greater distance above the cooking surface. Electrical and Gas Specifications Be sure your appliance is properly installed and grounded by a qualified technician. Installation, electrical and gas connections, and grounding must comply with all applicable local codes. Natural Gas or LP Thermador Dual-Fuel Pro Harmony Ranges are shipped by the factory to operate on natural gas. They must be converted for use with propane. Verify that the type of gas being used at the installation site matches the type of gas used by the appliance. If the location / job site requires conversion from natural gas to propane (LP), an LP gas conversion kit must be purchased separately. Field conversion must be done by qualified service personnel only. Please refer to the LP Conversion Instructions packed with product for further information. A manual gas shut-off valve must be installed external to the appliance, in a location accessible from the front, for the purpose of shutting off the gas supply. The supply line must not interfere with the back of the unit. Natural Gas Requirements: • Inlet Connection: 3/4" NPT external, 1/2" NPT internal (Minimum 3/4" diam. flex line.) • Supply Pressure: 6" min. to 14" max. water column. (14.9 mb to 34.9 mb) • Manifold Pressure: 5" water column (12.5 mb) Propane Gas Requirements: • Inlet Connection: 3/4" NPT external, 1/2" NPT internal (Minimum 3/4" diam. flex line.) • Supply Pressure: 11" min. to 14" max. water column. (27.4 mb to 34.9 mb) • Manifold Pressure: 10" water column (24.9 mb) High Altitude: High altitude kits are available for Thermador Pro Harmony Ranges. Reference the Accessory chart or Contact Customer Support for details. 22 Visit Thermador.com for complete specifications or text a Thermador model number to 21432 to have specs sent to your phone PRO HARMONY® PLANNING INFORMATION Professional Ranges Dual-Fuel: Thermador Pro Harmony Dual-Fuel Ranges are dual rated, designed to be connected to either 240 / 208V AC, 60 Hz, 4-wire, single-phase power supply. The connection may be made with a range supply cord kit (purchased separately) or by hard-wiring to the power supply. A dedicated circuit breaker is required. Model PRD486WDHU PRD364WDHU PRD366WHU PRD305WHU PRD304WHU Required Circuit Breaker 240 / 208V AC, 60 Hz 50 A 30 A 30 A 30 A 30 A All-Gas: Thermador Pro Harmony All-Gas Ranges are equipped with a 3-wire plug and are designed to be connected to a 120V AC, 60 Hz, singlephase power supply. A dedicated circuit breaker is required. Model PRG486WDH PRG364WDH PRG366WH PRG305WH PRG304WH Required Circuit Breaker 120V AC, 60 Hz 20 A 20 A 15 A 15 A 15 A Induction: Thermador Pro Harmony Induction Ranges are dual rated, designed to be connected to either 240 / 208V AC, 60 Hz, 4-wire, single-phase power supply. The connection may be made with a range supply cord kit (purchased separately) or by hard-wiring to the power supply. A dedicated circuit breaker is required. Model PRI36LBHU PRI30LBHU Required Circuit Breaker 240 / 208V AC, 60 Hz 50 A 50 A Electrical Supply IMPORTANT: The cord supplied with gas ranges having an electric griddle requires NEMA 5-20 RECEPTACLE PLUG a NEMA 5-20 receptacle as shown here. Local codes my require a different wiring method. WARNING: This appliance is equipped with a three-prong grounding plug for protection against shock hazard and should be plugged directly into a properly grounded receptacle. DO NOT cut or remove the grounding prong from this plug. DO NOT ALTER THIS PLUG. Electrical and Gas Locations Typical placement of the electrical and gas supply can be found within the "Cutout and Range Dimensions" located on the installation pages. Alternate placement within the supply zone is acceptable. Dual-Fuel ranges may be connected to the power supply with a range supply cord kit (sold separately) or by hard-wiring to the power supply. All-gas ranges may be connected to the power supply with the supplied range cord or by hard-wiring. It is the responsibility of the installer to provide the proper wiring components (cord or conduit and wires) and complete the electrical connection as dictated by local codes and ordinances and/ or the National Electric Code. The units must be properly grounded. Installation of the range must be planned so that the rough-in of the junction box for the receptacle or conduit connection will allow maximum clearance to the rear of the unit. Visit Thermador.com for complete specifications or text a Thermador model number to 21432 to have specs sent to your phone 23