Thermador HMWB36WS View Kitchen Design and Planning Guide - Page 15
Inch and 36-Inch Range Dimensions and Clearance Requirements With Flush Island Trim, Professional
View all Thermador HMWB36WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
| THERMADOR | RANGES | THERMADOR | RANGES PRO HARMONY® INSTALLATION Professional Ranges, All-Gas and Dual-Fuel 48-Inch and 36-Inch Range Dimensions and Clearance Requirements With "Flush Island Trim" 36" (914 mm) min. to combustible materials 6" (152 mm) min. to combustible surface with Flush Island Trim Combustible Materials Shaded area behind range indicates minimum clearance to combustible surfaces, combustible materials cannot be located within this area. 35 7/8" (911 mm)Min. 36 ¾" (933 mm) Max. 28" (711 mm) 27¼" (692 mm) 245/8" (625 mm) 24" (610 mm) max. recess depth For Flush Island Trim installations, counter surface should have a cantilever edge meeting the back section of the Flush Island Trim accessory. Cantilever 24¾" (630 mm) 22 5/8" (575 mm) 447/8" (1140 mm) Total Clearance As defined in the "National Fuel Gas Code" (ANSI Z223.1, Current Edition). Clearances from non-combustible materials are not part of the ANSI Z21.1 scope and are not certified by CSA. Clearances of less than 6" (152 mm) must be approved by the local codes and/or by the local authority having jurisdiction. If an inner wall is used under the cantilever counter top, there should be a 1/8" (3 mm) gap from the rear of the range to the inner wall. 26 Visit Thermador.com for complete specifications or text a Thermador model number to 21432 to have specs sent to your phone PRO HARMONY® INSTALLATION Professional Ranges, All-Gas and Dual-Fuel 30-Inch Range Cabinet Clearances With Hood - 5 Burners 3w0id"e-h3o6o"d(762 - 914 mm) The range height is adjustable. The level of the range top must be at the same level or above the counter top level. *35 7/8" (911 mm) Min. range height with leveling legs fully retracted. *36 3/4" (933 mm) Max. range height with leveling legs fully extended. m18in"im(4u5m7 mm) ts5oi"dc(e1ow2ma7bllmsusmtib) lme in. 3fh3hcro0o6oom"o"omdd((b79butc61ooso24ttnctiobmmtoamloemminkmo))sinfmmagotiievsnneru..irarihfflaecaed. 1(mcd3a3ea3b"px0itn.hmetm) 30" (762 mm) 0" to bCalecak rwanaclle CAUTION! 36" (914 mm) min. to combustible material from Cooking Surface as defined in the "National Fuel Gas Code" (ANSI Z223.1, Current Edition). Clearances from non-combustible materials are not part of the ANSI Z21.1 scope and are not certified by CSA. as defined in the "National Fuel Gas Code" (ANSI Z223.1, Current Edition). Clearances from non-combustible materials are not part of the ANSI Z21.1 scope and are not certified by CSA. For Gas Supply & Electrical Zones. Visit Thermador.com for complete specifications or text a Thermador model number to 21432 to have specs sent to your phone 27