Toshiba 52HMX95 Owner's Manual - English - Page 23

Chapter 2: Connecting your TV Connecting an IR receiver/repeater or home theater control system to the TheaterNet IN infrared terminal For additional control options for your home theater system, you can connect an IR receiver/repeater (not included) or a home theater control system (not included) to the TV's TheaterNet IN infrared terminal.* See the Specifications section in the back of this manual for TheaterNet IN terminal requirements. Contact your home theater electronics dealer for details about IR receivers/repeaters and home theater control systems. You will need: one IR cable TV back panel TheaterNet™ on-screen device control For additional control options for your home theater system, set up the TheaterNet on-screen device control feature. You can use this feature to control many IR remote-controlled devices and IEEE1394 devices using the on-screen control icons. Toshiba Video 3 TOP MENU ENTER EXIT TV/VIDEO EXIT CHANNEL VOLUME MENU POWER See pages 50-54 for details on setting up and using TheaterNet. See pages 25-27 for details on connecting IEEE1394 devices. Note: The TheaterNet on-screen icons are the only device functions available when the icons are on-screen. To access other device functions, close the TheaterNet icon window. OUT IN Back of IR receiver/repeater or home theater control system* (not included) To operate the TV with this connection, point the Toshiba TV remote control toward the front of the IR receiver/ repeater or home theater control system. TV/VIDEO EXIT CHANNEL VOLUME MENU POWER IR receiver/repeater or home theater control system ___________ *The TheaterNet IN function has been verified for use with SmarTouch™ STS/STS-C wireless RF control systems. Due to the wide variation in remote control operation among manufacturers, these functions may or may not operate with other brands. SmarTouch is a trademark of Crestron Electronics, Inc. (www.crestron.com). Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. 23