Toshiba DKT3210-SD User Manual - Page 94

DADM/DSS Console DSS Console DSS Console The Direct Station Selection (DSS) console operates alongside of a digital telephone to provide 60 additional buttons. The 3000-series and 3500-series telephone requires a 3000-series DSS; the 2000-series telephone requires a 2000-series DSS. An example of the DDSS3060 is shown right. The DDSS2060 (not shown) looks similar and has the same button/LED functions. The buttons can be programmed as DSS, outside Line, All Call Page, Night Transfer, and Station or System Speed Dial. LEDs on the DSS light or flash red or green, depending on the status. Note Button numbers in the above figure are examples only. 209 219 208 218 207 217 206 216 205 215 204 214 203 213 202 212 201 211 229 239 228 238 227 237 226 236 225 235 224 234 223 233 221 232 221 231 249 NT 248 AC 247 257 246 256 245 255 244 254 243 253 242 252 241 251 DSS Buttons 200 210 220 230 240 250 DSS buttons can appear on both the DADM and DSS Console. Each DSS button is associated with a 2039 particular station in your telephone system. DSS buttons can transfer an outside call to the associated station or make a direct call to the associated station. The DSS LED lights steady red when the station associated with the DSS button is ringing, busy on a call, or when the associated station is idle, but all appearances of the station's extensions are busy or in-use by other stations. When the associated DSS button is in the Do Not Disturb mode, the LED blinks red at a slow rate. DSS buttons cannot call station Phantom extension numbers, Distributed Hunt Group Directory Numbers, or ACD Groups. DSS buttons may be configured as One Touch Buttons that may be programmed to call these destinations. Features The LED colors described in this section apply to the DADM3020 and DDSS3060. Described Flash/ Recall conditions apply to all DSS console models and the DADM. Strata CTX DKT3000/3500-Series Digital Telephone October 2002 81