Toshiba DX730 PQQ10C-01C00G Users Manual Canada; English - Page 85
Installing a memory module, Power
View all Toshiba DX730 PQQ10C-01C00G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
TOSHIBA DX730/DX735/Qosmio DX730 Series Do not try to install or remove a memory module under the following conditions. a. The computer is turned on. b. The computer was shut down in either Sleep or Hibernation Mode. c. Wake-up on LAN is enabled. d. The wireless communication function is on. e. Sleep and Charge function is enabled. Be careful not to let screws or other foreign matter fall into the computer. It could cause malfunction or electric shock. Additional memory module is a precision electronic component that may be fatally damaged by static electricity. Since the human body can carry static electricity, it is important that you discharge yourself before touching or installing any additional memory modules. To discharge your body's static electricity, simply touch any metal close to you with bare hands. Use a point size 0 Phillips screwdriver to remove and fasten the screws the use of an incorrect screwdriver can damage the screw heads. Installing a memory module To install a memory module, follow the steps as detailed below: 1. Shut down the computer - make sure the Power indicator is off (refer to the Turning off the power section in Chapter 1, Getting Started if required). 2. Remove the AC adaptor and all cables and peripherals connected to the computer. 3. Turn the computer back to you. 4. Loosen the screw securing the memory module cover in place please note that the screw is attached to the cover in order to prevent it from being lost. 5. Slide your fingernail or a thin object under the cover and lift it off. Figure 3-9 Removing the memory module cover 1 2 1. Memory module cover User's Manual 2. Screw 3-36