Toshiba DX730 PQQ10C-01C00G Users Manual Canada; English - Page 87
Removing a memory module, Start -> Control Panel -> System and Security ->, System, Power
View all Toshiba DX730 PQQ10C-01C00G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
TOSHIBA DX730/DX735/Qosmio DX730 Series 7. Seat the memory module cover in place and secure it with the screw. Take care to ensure that the memory module cover is firmly closed. Figure 3-11 Seating the memory module cover 1 2 1. Memory module cover 2. Screw 8. Turn the computer on and make sure the added memory is recognized - to confirmed it, Start -> Control Panel -> System and Security -> System icon. Removing a memory module To remove the memory module, follow the steps as detailed below: 1. Shut down the computer - make sure the Power indicator is off (refer to the Turning off the power section in Chapter 1, Getting Started if required). 2. Remove the AC adaptor and all cables and peripherals connected to the computer. 3. Turn the computer back to you. 4. Loosen the screw securing the memory module cover in place - please note that the screw is attached to the cover in order to prevent it from being lost. 5. Slide your fingernail or a thin object under the cover and lift it off. 6. Push the latches away from the module in order to release it - a spring will force one end of the module up at an angle. User's Manual 3-38