Toshiba PSM30C-7101U User Manual - Page 145
Changing the resolution, Parallel printer
View all Toshiba PSM30C-7101U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
OPTIONAL DEVICES Parallel printer NOTE: If a television is connected to the computer, set the TV type in Display Properties. Follow the steps below. a. Click start and click Control Panel. b. Double-click the Display icon to open the Display Properties window. c. Click the Settings tab and click the Advanced button. d. Click the nView Display Mode tab, click Device Settings and click Select Output Device. e. Select Advanced and select TV in the Device Selection window. f. Select the Format box and select the format that your TV supports. Changing the resolution After you connect a TV (NTSC), follow the steps below to set the Display resolution to 640 x 480. 1. Open Display properties and select the Settings tab. 2. Select Advanced. 3. Select the Adapter tab, then select List All Modes.... 4. Select 640 by 480, High Color (16 bit), 60 Hertz. Parallel printer You can connect any standard Centronics-compatible parallel printer to your computer. All you need is an IBM PC™ parallel printer cable. Your dealer can supply one or you can purchase one at most computer stores. The cable's connectors are designed so that it is impossible for you to connect them incorrectly. To connect a printer, follow these steps: 1. Turn off the computer. 2. Insert one end of the cable into the computer's parallel port. 3. Tighten the screws that fasten the cable connector to the computer's parallel port. 4. Insert the other end of the cable into the printer's parallel connector. 5. Fasten the connector to the printer with the clips on the parallel port. 6. Turn on the printer. 8-11